Converting a Lead Acid Battery to Alkaline

AI Thread Summary
The discussion revolves around a method to convert standard lead acid batteries into alkaline batteries, which reportedly enhances capacity and improves deep discharge performance. While the conversion process maintains similar charging voltages, there are mixed testimonials regarding its success and failures. Concerns are raised about the environmental implications, as the conversion does not eliminate the lead content in the batteries. The main interest lies in understanding the scientific basis for the claimed benefits and why this conversion isn't more widely adopted. Overall, the conversation seeks informed opinions on the feasibility and implications of this battery conversion method.
nobb123
Messages
15
Reaction score
0
I came across this interesting article to convert a standard lead acid battery into alkaline:

http://blog.hasslberger.com/2007/01/how_to_convert_a_lead_acid_bat.html

Seems very promising. Not only does the capacity increase slightly, but the battery also withstands deep discharges much better than a conventional lead acid. Still charge with approximately the same voltage. Perfect right? There are a few testimonials of the success and failures of people attempting this conversion.

I am just curious as to what you guys think. Would love to hear an intelligent opinion on this matter.
 
Engineering news on Phys.org
No idea what is the chemistry behind, but claim that these batteries are clean is plainly wrong - if you convert an old acid battery, it still contains the same lead electrodes.
 
Last edited:
Well actually, I was most interested in the fact that they claim these batteries can be cycled more deeply than conventional lead acid. Just wondering if there was a scientific explanation and why everyone shouldn't convert their lead acids.
 
Hello! I've been brainstorming on how to prevent a lot of ferrofluid droplets that are in the same container. This is for an art idea that I have (I absolutely love it when science and art come together) where I want it to look like a murmuration of starlings. Here's a link of what they look like: How could I make this happen? The only way I can think of to achieve the desired effect is to have varying droplet sizes of ferrofluid suspended in a clear viscous liquid. Im hoping for the...
Hello everyone! I am curious to learn how laboratories handle in-house chip manufacturing using soft lithography for microfluidics research. In the lab where I worked, only the mask for lithography was made by an external company, whereas the mold and chip fabrication were carried out by us. The process of making PDMS chips required around 30 min–1 h of manual work between prepolymer casting, punching/cutting, and plasma bonding. However, the total time required to make them was around 4...
Back
Top