Crazy thing happens when I play with my laser

  • Thread starter Thread starter beholderseye
  • Start date Start date
  • Tags Tags
    Laser
AI Thread Summary
A strong green laser, around 200 mW, creates an unexpected interference pattern when aimed at a mirror, resulting in a unique visual effect on the wall. This phenomenon is attributed to self-interference, where the light waves interact with themselves, producing circular patterns that change with distance from the center. Observers suggest that the pattern may also arise from the mirror's surface characteristics, and experimenting with different reflective surfaces, like tin foil, could yield different results. The discussion highlights the complexity of light behavior and the challenges in capturing the effect visually. Overall, the interaction of laser light with reflective surfaces leads to intriguing optical phenomena.
beholderseye
Messages
6
Reaction score
0
I have a strong green laser, about 200 mw. I discovered this a long time ago and have wondered why it does this ever since...

I shine my laser at a mirror. It bounces back, with a brighter beam. That's not what confuses me. What confuses me is when I try to aim the bounceback beam to perfectly intersect with my current beam, I get this CRAZY pattern on the wall right behind my hands:

2459801-blue-water-abstract-background-with-circular-wave-ripple-pattern.jpg


Kind of like this, but the waves get closer and closer together the further from the center.

I am so confused and confounded by this. Can someone explain the physics behind this?
 
Science news on Phys.org
I can't speak on the specifics of the situation without a picture of the 'ripples', but what is happening is that the light is interfering with itself which causes an interference pattern, I believe the pattern is circular when a beam is interfering with itself, which would explain this.
 
Its weird though, because the pattern, while strongest when the laser hits itself, appears even when the beam is not touching itself but still being reflected off of the mirror.
 
Very hard to get a picture of it too.
 
beholderseye said:
Very hard to get a picture of it too.

do it anyways, but the answer is interference.
 
beholderseye said:
Very hard to get a picture of it too.

I don't blame you!


I can imagine why that happens, and to me it definitely sounds like self-interference.
 
Managed to get a video of it.

https://www.youtube.com/watch?v=http://youtu.be/38U2Evzb8jw

 
Last edited by a moderator:
I would suspect that an interference pattern is being generated from the two interfaces of the mirror.

Try doing the same experiment with the shiny side of tin foil instead of a mirror. I would expect the pattern to be not present if the above hypothesis is true.
 
It looks like an Airy pattern, which is what you would get when scattering off a small particle.

If the laser is powerful enough, it can form a defect which it then scatters off in the manner that you recorded in your youtube video.

In short, it is likely scattering off a point-like source rather than interference per se.

Claude.
 

Similar threads

A The coherence length is much longer than the manufacturer claims
Replies
10
Views
2K
How to estimate the power of a laser pointer
Replies
8
Views
5K
I Light coupling in fiber optic cables
Replies
22
Views
3K
Debug help: optical laser interference setup fails to work
Replies
8
Views
2K
How Can I Mathematically Represent the Polarization of a Laser Beam?
Replies
1
Views
6K
What Happens When a Laser Hits a Mirror Corner?
Replies
6
Views
3K
What is the Type of Laser Used in My Wine Raman Spectrometer?
Replies
7
Views
2K
Violet light produced from green He-Ne laser?
Replies
8
Views
4K
I How Can Laser Light Mixing Reveal Quantum Entanglement?
Replies
16
Views
2K
Laser/Wave Phenomena Exploration
Replies
2
Views
2K

Hot Threads

Recent Insights

Back
Top