Designing a Logic Circuit for Decimal Number Sum w/ Multisim

  • Thread starter bue99
  • Start date
  • Tags Tags
    Circuit
1 reply · 5K views · last reply
bue99
Messages
1
Reaction score
0
hi everyone. I am a beginner to multisim. as practice, I am trying to design a logic circuit that can calculate and display the total of two decimal numbers. I am familiar with the functions of combinational logic, and i know that this circuit will require full adders, encoders, decoders and 7 segment display, however I am unsure as to how to connect everything.
any suggestions or simliar circuits that i can look at or learn from will be very helpful. thank you.
 
UPS circuit PIC

An uninterruptible power supply, also uninterruptible power source, UPS or battery/flywheel backup, is an electrical apparatus that provides emergency power to a load when the input power source, typically the utility mains, fails.


The circuit diagrams are given here the code is not provided.

Regards,
Jazib.
 
Attachments
  • Schematic of a PIC16F72 microcontroller UPS circuit showing pin connections for AC input, battery DC volts, charging current, inverter load current, inverter feedback, a 20 MHz crystal, zero cross detector, LEDs, a buzzer, on/off switch, inverter relay and charging relay.
    controller.jpg
    23 KB · Views: 488
  • Circuit schematic of a UPS, showing two BASE inputs driving D313 and C828 transistor stages, power transistor banks feeding a mains transformer, a charging relay with CHARGER contacts, and an inverter relay with OUTPUT, MAINS INPUT, N and F labels.
    inv drive.jpg
    19.8 KB · Views: 510