Difficult: Linear vs. Angular acceleration

Click For Summary

Homework Help Overview

The problem involves a board hinged to the ground with a cup attached, where a ball is positioned on the edge of the board. The objective is to determine the minimum angle at which the board must be dropped for the ball to lag behind and be caught by the cup. The discussion encompasses concepts of linear and angular acceleration, torque, and the motion of falling objects.

Discussion Character

  • Mixed

Approaches and Questions Raised

  • Participants explore the relationship between the angle of the board and the motion of the ball, questioning the assumptions about torque and acceleration. There are attempts to derive expressions for angular acceleration and the conditions under which the ball will lag behind the board.

Discussion Status

Several participants have provided insights and hints regarding the calculations needed to find the required angle and the placement of the cup. There is ongoing exploration of the implications of different angles and the resulting accelerations, with some participants expressing confusion about specific aspects of the problem.

Contextual Notes

Participants note the importance of the initial position of the ball and the assumptions regarding its motion, as well as the need to clarify the angle used in torque calculations. There is a mention of homework constraints and the challenge of balancing simplicity with the complexity of mechanics problems.

datdo
Messages
11
Reaction score
0

Homework Statement



A board of mass m and length L is hinged to the ground. Attached to the board is a cup of negligible mass and is positioned Rc away from the hinge. Also on the edge of the board a ball rests. When the board is dropped from an angle of theta the ball is meant to be caught in the cup.

A) What is the minimum angle required for the ball to lag behind the board? I think cos(theta) > 1/2

B) Where must the cup be placed in order to catch the ball in terms of theta and L? I think the answer to this one was L/2cos(theta)

Homework Equations



F=ma

[tex]\tau=Frsin\theta[/tex]

[tex]\tau=I\alpha[/tex]

[tex]\alpha r=a[/tex]

The Attempt at a Solution



I'm really lost.

I guess for the cup to catch the ball both objects must be in the same spot in time so if I find their positions with respect to time and find their intersection...

board:
[tex]\tau=.5mgLsin\theta[/tex]
[tex]\alpha=\frac{3\tau}{mL^2}[/tex]

cup:
[tex]a_c=\alpha R_c[/tex]

ball:
[tex]a_b=g[/tex]

I don't know where to go from here...
 

Attachments

Last edited:
Physics news on Phys.org
datdo said:
board:
[tex]\tau=.5mgLsin\theta[/tex]
Why sinθ?

You neglected to point out that the ball starts out balanced on the edge of the board.

Hints:

For A: What's the acceleration of the edge of the board? How must it compare to the acceleration of the falling ball in order for the ball to fall freely?

For B: The ball falls straight down.
 
sorry about that.

its sin because torque is [tex]F\times r = Frsin\theta[/tex]
the angular acceleration increases as the angle decreases
A)

[tex]\alpha=\frac{3gsin\theta}{2L}[/tex]
end of the board:
[tex]a_e=\frac{3gsin\theta}{2}[/tex]

[tex]g\leq\frac{3gsin\theta}{2}[/tex]

[tex]\frac{2g}{3g}\leq sin\theta[/tex]

[tex]\frac{\sqrt{5}}{3}\leq cos\theta[/tex]? but isn't the answer...


B)
[tex]R_c=Lcos\theta[/tex]
 
datdo said:
its sin because torque is [tex]F\times r = Frsin\theta[/tex]
It would be sinθ if θ was the angle between r and F, not r and the horizontal.
the angular acceleration increases as the angle decreases
A)

[tex]\alpha=\frac{3gsin\theta}{2L}[/tex]
end of the board:
[tex]a_e=\frac{3gsin\theta}{2}[/tex]

[tex]g\leq\frac{3gsin\theta}{2}[/tex]

[tex]\frac{2g}{3g}\leq sin\theta[/tex]
Redo this with the correct angle.

[tex]\frac{\sqrt{5}}{3}\leq cos\theta[/tex]? but isn't the answer...
Not exactly.

B)
[tex]R_c=Lcos\theta[/tex]
Good.
 
understood.

[tex]\alpha=\frac{3gsin(\pi/2 -\theta)}{2L}[/tex]
end of the board:
[tex]a_e=\frac{3gsin(\pi/2 -\theta)}{2}[/tex]

[tex]g\leq\frac{3gsin(\pi/2 -\theta)}{2}[/tex]

[tex]\frac{2g}{3g}\leq sin(\pi/2 -\theta)[/tex]

[tex]\frac{2}{3}\leq cos\theta[/tex] this more likely...

B still confuses me..
 
datdo said:
understood.

[tex]\alpha=\frac{3gsin(\pi/2 -\theta)}{2L}[/tex]
end of the board:
[tex]a_e=\frac{3gsin(\pi/2 -\theta)}{2}[/tex]

[tex]g\leq\frac{3gsin(\pi/2 -\theta)}{2}[/tex]

[tex]\frac{2g}{3g}\leq sin(\pi/2 -\theta)[/tex]

[tex]\frac{2}{3}\leq cos\theta[/tex] this more likely...
Good. So what's the maximum angle?

B still confuses me..
What about it confuses you? The ball, which begins at the edge of the board, falls straight down. Find the horizontal distance between ball and hinge--that will tell you where to put the cup.
 
[tex]cos^-^1\frac{2}{3}[/tex]

I guess it just seems too simple...even for a mechanics problem...
 
datdo said:
I guess it just seems too simple...even for a mechanics problem...
Don't complain. :smile:

(I see that you tagged the thread with "Cooper Union". Are you a student there?)
 
I could be...
 

Similar threads

  • · Replies 14 ·
Replies
14
Views
4K
Replies
2
Views
2K
  • · Replies 33 ·
2
Replies
33
Views
3K
  • · Replies 5 ·
Replies
5
Views
6K
  • · Replies 1 ·
Replies
1
Views
2K
  • · Replies 7 ·
Replies
7
Views
2K
  • · Replies 9 ·
Replies
9
Views
3K
  • · Replies 7 ·
Replies
7
Views
3K
  • · Replies 18 ·
Replies
18
Views
4K
  • · Replies 15 ·
Replies
15
Views
6K