Electroscope experiment in vacuum

AI Thread Summary
The electroscope experiment in a vacuum shows that when aluminum leaves are charged and the pressure drops to around 30 inHg, the leaves abruptly collapse towards each other, indicating a breakdown phenomenon. This effect occurs consistently, and when the chamber is pumped down before charging, the gap between the leaves is smaller than at atmospheric pressure. The discussion suggests that this behavior may relate to Paschen's law, but the specifics of the setup differ from traditional applications of the law. The abrupt collapse is theorized to result from a chain reaction of ionization and electron recombination, leading to a diminishing electric field. Future experiments will explore the effects of different gases, such as helium, to enhance the longevity of the charge on the leaves.
Dan Haronian
Messages
3
Reaction score
0
Hi
I am running the electroscope experiment in vacuum. This is shown in (a) in the uploaded figure . Once the aluminum leafs are charged the chamber is pump down (b). As soon the pressure decrease low enough (around relative pressure of 30 inHg) the leafs collapse to each other abruptly.
Here is a short video of the collapsing leafs:
).
There is still a gap between the two leafs but it's much less than in atmospheric pressure. This effect takes place every time I run the experiment.

In another experiment, the chamber is pumped down before the leafs are charged. The gap between the leafs is much smaller than that in atmospheric pressure.

Can anyone explain why?
 

Attachments

  • upload_2017-5-29_16-29-2.png
    upload_2017-5-29_16-29-2.png
    5.1 KB · Views: 554
Last edited:
Physics news on Phys.org
Thank you drzoidberg,
I thought of Paschen's law as well but I am not sure because of the abrupt collapse. It looks more like some kind of breakdown. In addition there is only one charged electrode. V in Paschen's law refers to the breakdown voltage between two electrodes. Still there is an electric field between each leaf and the surroundings. So maybe some variation of Paschen's law. Paschen's law Is gas dependent. I am going to try different gasses to see how this affects the leaf collapsing.
 
Last edited:
I know that with a discharge tube, the discharge starts fairly abruptly as the pressure goes down.
 
  • Like
Likes Dan Haronian
The setup here is different than in a tube which Paschen's law refers to. V is the breakdown voltage between the two electrodes and d in p*d is the distance between the two electrodes. Yet, if we divide the two axis by d we get E as a function of p. E is the electric field at which breakdown takes place which is a function of the pressure. Referring to one leaf, E is proportional to 1/x^2. So the breakdown field is such that the MFP of electrons is such that they gain enough energy to ionize gas molecules. A breakdown in this case will be creation of many such ions (chain reaction) that flow to the leaf and recombine with electron on the leaf. E will diminish as the recombination progress and the overall effect will slow down. I assume that the abrupt effect where the two leafs collapse to each other (but not completely as in the video) is the chain reaction. The slow collapse of the leafs towards each other, that follows, is due to slower process of ion generation and recombination with electrons on the leaf.
Does this make sense?

I will run this experiment with He gas where the ionization energy is higher. My goal is to have the leaf stay charged for long time. Any ideas are welcomed.
 
Dan Haronian said:
My goal is to have the leaf stay charged for long time. Any ideas are welcomed.
Some possible approaches:
  • Pull a good vacuum before charging
  • Fill the container with Argon
  • Fill the container with Sulfur HexaFluoride (HF6)
  • Super cleanliness of insulator around the electrical contact to the outside world
  • Hydrophobic coating on that insulator
  • Of course no sharp edges or points on external connection, a sphere is best
  • Enclose the whole thing in another vacuum chamber or in a dry Nitrogen atmosphere
  • If the whole thing is not in a vacuum, then shield from ionizing radiation, including UV light

The above is just "stream-of-consciousness", and some or all may be no good at all!:wink:
 
  • Like
Likes Dan Haronian
Thread 'Inducing EMF Through a Coil: Understanding Flux'
Thank you for reading my post. I can understand why a change in magnetic flux through a conducting surface would induce an emf, but how does this work when inducing an emf through a coil? How does the flux through the empty space between the wires have an effect on the electrons in the wire itself? In the image below is a coil with a magnetic field going through the space between the wires but not necessarily through the wires themselves. Thank you.
Thread 'Griffith, Electrodynamics, 4th Edition, Example 4.8. (Second part)'
I am reading the Griffith, Electrodynamics book, 4th edition, Example 4.8. I want to understand some issues more correctly. It's a little bit difficult to understand now. > Example 4.8. Suppose the entire region below the plane ##z=0## in Fig. 4.28 is filled with uniform linear dielectric material of susceptibility ##\chi_e##. Calculate the force on a point charge ##q## situated a distance ##d## above the origin. In the page 196, in the first paragraph, the author argues as follows ...
Back
Top