Finding distance with the conservation of energy equation

AI Thread Summary
The discussion revolves around solving a physics problem involving a baseball thrown at an angle, focusing on the initial kinetic energy (KE) and maximum height using the conservation of energy equation. The initial KE was correctly calculated as 67.5 J. For the maximum height, the user initially miscalculated the potential energy (Uf) due to a small error in the mass value, leading to an incorrect height of 4.96 m. After correcting the mass in the potential energy equation, the user found the correct maximum height to be 16.6 m. The exchange highlights the importance of careful attention to detail in physics calculations.
asdf12321asdf
Messages
22
Reaction score
0

Homework Statement


3. A baseball (m = 0.150 kg) is thrown with an initial speed of 30.0 m/s at an angle of 37.0 degrees from the horizontal at y = 0 m. (a) Find the initial KE of the ball. (b) Use conservation of energy (not kinematic equations) to find the maximum height reached by the ball. (Hint: Does the ball have any velocity at its maximum height?)


Homework Equations


KEf + Uf = KEi + Ui
(.5)mvf² + mgyf = (.5)mvi² + mgyi


The Attempt at a Solution


(a) Part a I got the correct answer, but can you tell me if I did it the correct way. I did (.5)(0.15)(30)² = 67.5J

(b) What I tried was using KEf + Uf = KEi + Ui . For the velocity at the top I accounted for the angle and got that the velocity in the x direction was 24.0m/s So I did:

(.5)(0.15)(24.0)² + (.5)(9.8)y = 67.5 (from part a) + (0.15)(9.8)(0)

Solving for y I get 4.96m, but that is not the correct answer. I'm not sure if I am doing it the wrong way or if I made some error somewhere, so any help would be appreciated.

Thanks
 
Physics news on Phys.org
You did 'a' correctly.

For 'b', check your Uf.
 
Oh wow, thanks a lot. I changed the m in Uf to .15 and then got 16.6m which is the correct answer. It's unfortunate I've spent all this time on this problem due to this small error, though it's reassuring to know I was doing it the right way at least. Thanks again!
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top