Gauge Pressure of Tires - find car mass

AI Thread Summary
The gauge pressure in each tire is 240 kPa, with a footprint area of 22.0 cm², leading to confusion in calculating the car's mass. The initial calculations incorrectly used the area of one tire instead of the total area for all four tires. After correcting the footprint area to 220 cm², the calculations yield a more realistic mass estimate for the car. The final mass calculation, using the corrected area, indicates a mass of approximately 2.2 x 10³ kg. This highlights the importance of accurate data in physics problems.
BeiW
Messages
7
Reaction score
0
Gauge Pressure of Tires -- find car mass

Homework Statement


The gauge pressure in each of the four tires of an automobile is 240 kPa. If each tire has a "footprint" of 22.0 cm-squared, estimate mass of the car.

P=240 kPa
A=22.0 cm-squared
g=9.8 m/s^2

Homework Equations


P=F/A
1 atm = 1.013x(10^5) N/m^2 = 101.3 kPa
A=.22 m^2 for each tire

The Attempt at a Solution


P = 2.4x(10^5) N/m^s = F/A = (mg)/A for each tire
m= (PA)/g = (2.4x(10^5))(.22) / (9.8) = 5387.76 kg?
 
Physics news on Phys.org


1cm = 10-2m -> 1cm2=10-4m2.

You need to convert 22cm^2 to m^2, I think you will also need multiply by 4 since there are 4 tires.
 


So the tire area is .0022m2?
Then for 4 tires, the area is .0088m2.

m= (PA)/g = (2.4 x 105)(.0088) / (9.8) = 215.510 kg
If you round that, it should be 2.2 x 102 kg, but the real answer is 2.2 x 103...

What am I missing?

rock.freak667 said:
1cm = 10-2m -> 1cm2=10-4m2.

You need to convert 22cm^2 to m^2, I think you will also need multiply by 4 since there are 4 tires.
 


BeiW said:
So the tire area is .0022m2?
Then for 4 tires, the area is .0088m2.

m= (PA)/g = (2.4 x 105)(.0088) / (9.8) = 215.510 kg
If you round that, it should be 2.2 x 102 kg, but the real answer is 2.2 x 103...

What am I missing?

There is probably a typo in the "footprint" area. Things would look more realistic if the value was 220cm2.
 


gneill said:
There is probably a typo in the "footprint" area. Things would look more realistic if the value was 220cm2.
I just checked the book again, and you're right. It actually says 220cm.

Thanks! :)
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top