Identifying a vintage Cenco Scientific electrical device

16 replies · 4K views · last reply
logic3214
Messages
9
Reaction score
0
Reader,

Forgive me if I break any of forum rules, as I am a newbie posting here. Today, last minute Christmas with my beloved other, I found some sort of vintage electrical device. I understand the basic principles behind what would be happening on the stand with electricity. However I am missing is the intended purpose of device or actually what it was meant to do . I wonder if the platform in the middle was meant to hold some sort of substance to be bombarded with electricity, or the platforms preforms another purpose?? I have been thorough the entire Cenco Scientific catalog and found nothing. Help Please! I can post more pictures or video if needed as well as more details only a small stamp on plate with number and Cenco Tag. All pictures thus far are attached.

Thank You,
SMG
 
Attachments
  • Close-up of a vintage laboratory apparatus with a brass plate having a central hole and six surrounding holes, mounted on a black rubber base with the word cenco embossed on it.
    IMAG0459.jpg
    28.2 KB · Views: 690
  • Close-up of a black circular laboratory apparatus with a brown wooden or bakelite rim, a white Cenco Scientific Instruments, Apparatus, Chemicals label with Central Scientific Co. Chicago printed on it, and two metal binding posts at the top.
    IMAG0460.jpg
    47.3 KB · Views: 638
  • Close-up of a black circular laboratory apparatus with a hand holding a metal rod at upper left, a Cenco label on its face, two terminal posts, and a central hole, with a multimeter visible at right.
    IMAG0461.jpg
    40.3 KB · Views: 708
  • Vintage brass and dark wood electrical apparatus with a round brass plate having several holes, a brass lever switch on its left side, and binding posts, sitting on a periodic table placemat beside a yellow multimeter.
    IMAG0454.jpg
    55.6 KB · Views: 681
  • Photo of a vintage laboratory apparatus on a tripod base with three metal legs, a dark circular top plate with a metal rod and a coiled wire spring at the top, and a black handle hanging below.
    IMAG0456.jpg
    24.5 KB · Views: 693
  • Photo of a vintage metal apparatus on a table: a black disc platform held by three thin metal rods, with a short black handle and small brass-tipped rods rising from the top.
    IMAG0457.jpg
    23.1 KB · Views: 699
What you have is for supporting electrodes being dipped into various solutions. Sometimes for laboratory work, sometimes for plating, sometimes for just puttering around. You might check under "cell electrode holders" or something similar, electrolysis accessories, plating fixtures, something along those lines. What you've got pictured is "upside down." The coil at the end of the two pylons is dipped into a beaker, and the bakelite sits like a nice little pot lid on the top of the beaker. The piece you've got looks like someone measuring fusing currents of copper wire in transformer oil or, some similar purpose.
 
  • Like
Likes   Reactions: logic3214
Bystander said:
What you have is for supporting electrodes being dipped into various solutions. Sometimes for laboratory work, sometimes for plating, sometimes for just puttering around. You might check under "cell electrode holders" or something similar, electrolysis accessories, plating fixtures, something along those lines. What you've got pictured is "upside down." The coil at the end of the two pylons is dipped into a beaker, and the bakelite sits like a nice little pot lid on the top of the beaker. The piece you've got looks like someone measuring fusing currents of copper wire in transformer oil or, some similar purpose.

Bystander,
Thank you I am about to do a search now.
SMG
 
I've got one in the basement that is very similar; four terminals feeding through the lid to slit clamps for grabbing metal strips/coupons, and possibly Ag plated.
 
Would you mind if you find some free time posting a few pictures or sending to me direct. I am still having problems identifying. Looked up some different electrolysis methods but have failed to find this specific device.
 
No problem sounds great, I did not want to blow any fuses before Christmas anyway. I am about to go back to the thrift shop and buy some more equipment. They have a bunch of different old school lunch box style meters, and switches etc..
 
logic3214 said:
No problem sounds great, I did not want to blow any fuses before Christmas anyway. I am about to go back to the thrift shop and buy some more equipment. They have a bunch of different old school lunch box style meters, and switches etc..

Welcome to the PF.

You might enjoy this thread that was "stickied" in the EE forum for quite a while:

https://www.physicsforums.com/threa...and-measuring-things-etc.755959/#post-4761264

It's about vintage electrical and electronic equipment. :-)
 
Here goes nuttin'. We'll see how well I can handle 21st century technology. Images show top, bottom, and designed application of the device supporting paper dummy electrodes in a beaker (probably got used more in old mayonnaise jars than in beakers).https://physicsforums-bernhardtmediall.netdna-ssl.com/data/attachments/60/60069-9ec7997b8862dcb879cfb2333a30065b.jpg https://physicsforums-bernhardtmediall.netdna-ssl.com/data/attachments/60/60070-ed944ad21007de9d33dc30b9e225d049.jpg https://physicsforums-bernhardtmediall.netdna-ssl.com/data/attachments/60/60072-641d48b156e46b451629f68f0d001ec3.jpg
 
Attachments
  • Photo of a Schott Duran 600 ml glass beaker with three strips of white tape on its side, with a black lid and metal fittings on top.
    IMGP0408.JPG
    51.5 KB · Views: 906
  • Top view of a glass vessel with a black rubber cap holding two hex-nut terminals and three rectangular metal contact tabs arranged in a triangle, with a glass side arm at the left.
    IMGP0407.JPG
    60.8 KB · Views: 899
  • Top view of a glass-bodied electrical device with a black Bakelite-style cover holding three nickel-plated binding posts with clamp screws and attached metal strips.
    IMGP0405.JPG
    48.7 KB · Views: 943
Last edited by a moderator:
Interesting, I actually picked up a few items, which look more along the lines of what I see pictured above, almost identical, minus the glassware. I'm still not seeing it with the first device. The glassware for it must have looked like a fish bowl lol. Next step is to find some glass ware. Thank you for the help I'll post some more pics tomorrow. Also planning to repost to vintage equipment thread.
 
Oh by the way, thanks for the pictures. Where did you find your equipment/glass?
 
Last edited by a moderator:
Looking again at the first item you posted, it has a suspiciously remanufactured look to it as if someone were trying to "communicate with the inhabitants of Atlantis by dipping it in sea water samples from the Bermuda Triangle, or some similar sort of tin foil hat activity."

A word to the wise: might be worth keeping such things in plastic bags, and handling with plastic gloves, given that we've no idea what the actual histories are in terms of who was using them with solutions of "what." The "what" for the era from which this sort of equipment (Cenco) dates is pre-WWII, and the electrochemical games being played in those days involved some rather gratuitous uses of mercury, cadmium, lead, and other heavy metals that have been demonstrated to be hazardous, and could have left enough residues to be "iffy."
 
I did not even think about that. The equipment actually came out of a small college in Alabama that closed its science department, and this woman's grandfather has been storing it since. Most of it was gone by the time I found it, but of well. I'll post some other pics of some of the other findings today if I can ever get some sleep.
 
Just out of curiosity what time is it where you are?
 
Last edited by a moderator:
Gotcha Birmingham Al CTZ 0826 here and 11.11 celsius and rainy.