Installing a PA System in a Training Car

  • Thread starter Thread starter marinpa
  • Start date Start date
  • Tags Tags
    Car System
Join the discussion
Ask a follow-up here, or get your own question answered by working scientists, mathematicians and engineers — people, not an autocomplete.
Real named experts · corrections over time · the nuance an AI answer skips
6 replies · 4K views
marinpa
Messages
5
Reaction score
0
Hello,

Can someone tell me if my idea is workable or not.
I need to install a PA system in one of my training cars. Just the PA. No sirens, horns or whistles.

My idea is to use a simple setup: mic- car amplifier - speaker (100W)

The question is, can any mono car amplifier be used for this project?

I am thinking of this one in particular
http://www.fixya.com/recommendations/p75473-jbl_bp150_1_car_audio_amplifier
 
Last edited by a moderator:
Engineering news on Phys.org
You can use a car amplifier, but you would need a pre-amp to bring your mic output to line level for the amplifier to use. Also, the Amp you have in your link won't work at all, its a subwoofer amp, you need a full range amp. If you look at a few CB radios, most of them have a PA function built in, it would probably be cheaper. Also, in case you didn't know in most places its illegal to use a PA system on the street.
 
famousken said:
You can use a car amplifier, but you would need a pre-amp to bring your mic output to line level for the amplifier to use. Also, the Amp you have in your link won't work at all, its a subwoofer amp, you need a full range amp. If you look at a few CB radios, most of them have a PA function built in, it would probably be cheaper. Also, in case you didn't know in most places its illegal to use a PA system on the street.


Thank you for your answer. I will keep in mind your advice.
As for the the PA system, is not to be used on public road but closed driving course.
 
Old CB radios often had a PA output, I bet you could buy one on eBay for next to nothing, the speaker output is 8 ohms so you can go right to a PA speaker
 
fizz_it said:
Old CB radios often had a PA output, I bet you could buy one on eBay for next to nothing, the speaker output is 8 ohms so you can go right to a PA speaker

The CBs don't put out more than 30-40W to the speaker. We need 150-200W
 
marinpa said:
The CBs don't put out more than 30-40W to the speaker. We need 150-200W
Not with a horn speaker. Horns are amazingly efficent, trust me 30-40W will be plenty. Just for reference, one of those bullhorns they use in sports etc. are only around 10-15 watts and they will make you go def.