Just had an "e/M" physics 103 lab. Not sure what I am supposed to do. Help.

  • Thread starter Thread starter Eddie10
  • Start date Start date
  • Tags Tags
    Lab Physics
Click For Summary

Homework Help Overview

The discussion revolves around a lab assignment related to the "e/M" experiment typically conducted in Physics 103 courses, focusing on electricity and magnetism. The original poster expresses uncertainty about the objectives and procedures of the lab due to a lack of meaningful information and data collection challenges.

Discussion Character

  • Exploratory, Assumption checking, Problem interpretation

Approaches and Questions Raised

  • Participants inquire about the specific objectives of the lab and the type of data that should have been collected. There are suggestions for the original poster to provide more details, such as the lab procedure and any data gathered, to facilitate better assistance.

Discussion Status

The conversation is ongoing, with some participants providing guidance on the need for clearer information while others express frustration over the vagueness of the original post. There is an acknowledgment of the importance of context and specific details in lab work.

Contextual Notes

Participants note that the "e/M" lab may vary in meaning and execution across different institutions, highlighting the necessity for the original poster to clarify their specific lab context and requirements.

Eddie10
Messages
27
Reaction score
1

Homework Statement


I'm not really sure what goes here just yet because my lab on "e/M" is rather dry, and void of any meaningful information.

Homework Equations


Not sure yet.

The Attempt at a Solution


I do have an attempt, but it needs work.

Alright, so my problem with this lab is that it happened in a rather odd fashion. The group that I was supposed to take data with are really weird, and I didn't end up taking the data that they took, so it made everything a bit awkward.

However, I managed to get some data values for my lab, but I'm still unclear on how to proceed.

Can someone readily tell me about what I am supposed to accomplish with the "e/M lab" without any of my information, or do you need me to post some relevant information so that you guys can better help me out.

FWIW, the "e/M" lab is a traditional lab that is typically done in Physics 103 courses dealing with the topics of electricity, and magnetism.
 
Physics news on Phys.org
Eddie10 said:

Homework Statement


I'm not really sure what goes here just yet because my lab on "e/M" is rather dry, and void of any meaningful information.

Homework Equations


Not sure yet.

The Attempt at a Solution


I do have an attempt, but it needs work.

Alright, so my problem with this lab is that it happened in a rather odd fashion. The group that I was supposed to take data with are really weird, and I didn't end up taking the data that they took, so it made everything a bit awkward.

However, I managed to get some data values for my lab, but I'm still unclear on how to proceed.

Can someone readily tell me about what I am supposed to accomplish with the "e/M lab" without any of my information, or do you need me to post some relevant information so that you guys can better help me out.

FWIW, the "e/M" lab is a traditional lab that is typically done in Physics 103 courses dealing with the topics of electricity, and magnetism.

I'm afraid this is Physics Forum, not Psychic Hotline.

You have given us precious little information to work with. Clues like 'e/M' lab and 'Physics 103' may have some meaning to you, but they don't have any specific meaning to a group of people at large, I'm afraid. What may be Physics 103 at your school may be something else at another school.

What would be helpful would be if you would tell us the objective of the lab, the type of data you were supposed to collect, etc., etc. Labs usually are accompanied by a written procedure which the experimenter is supposed to follow. The procedure may even contain instructions on how to reduce and interpret the data collected. If you could post a copy of the procedure that would be a great help, along with any data you managed to collect.
 
  • Like
Likes   Reactions: Mark44
As far as I knows the e/m lab is about using an electric and a magnetic field to bend a beam of electrons?
What data do you have?
 
SteamKing said:
I'm afraid this is Physics Forum, not Psychic Hotline.

You have given us precious little information to work with. Clues like 'e/M' lab and 'Physics 103' may have some meaning to you, but they don't have any specific meaning to a group of people at large, I'm afraid. What may be Physics 103 at your school may be something else at another school.

What would be helpful would be if you would tell us the objective of the lab, the type of data you were supposed to collect, etc., etc. Labs usually are accompanied by a written procedure which the experimenter is supposed to follow. The procedure may even contain instructions on how to reduce and interpret the data collected. If you could post a copy of the procedure that would be a great help, along with any data you managed to collect.

Alright, I will post this sheet, and then see where we can go from here.

Thank you.
 
Perhaps an e/m lab has something to do with e/m ? You've been at it for close to a week now, so -- being a university student -- you must have some inkling of what might be involved and what's expected of you. When I read your post #1 here, I wholeheartedly agree with the first line in post #2.

Even a primary schooler can google "e/m apparatus lab" and come up with the
The magnetic field (B) produced by the coils is proportional to the current through the coils (I) times 7.80 x 10-4tesla/ampere [B (tesla) = (7.80 x 10-4) I].
in your second thread (your equipment has 7.7 but never mind).

The operation instructions to actually do the experiment are spelled out there as well, so don't bother to post them. Do the work and if you get stuck you can ask on PF. Use the template as a literate person would.
 
BvU said:
Perhaps an e/m lab has something to do with e/m ? You've been at it for close to a week now, so -- being a university student -- you must have some inkling of what might be involved and what's expected of you. When I read your post #1 here, I wholeheartedly agree with the first line in post #2.

Even a primary schooler can google "e/m apparatus lab" and come up with the in your second thread (your equipment has 7.7 but never mind).

The operation instructions to actually do the experiment are spelled out there as well, so don't bother to post them. Do the work and if you get stuck you can ask on PF. Use the template as a literate person would.
Thanks for advice, but save the condescending attitude for yourself.

Other than that, thanks for posting.

Separate your emotions from physics.

Thank you;.
 
Welcome
 
Eddie10 said:
Thanks for advice, but save the condescending attitude for yourself.

Other than that, thanks for posting.

Separate your emotions from physics.
Some advice - dial back the attitude about five notches. You are in the wrong here. The expectation at Physics Forums is that people posting will provide enough details so that the helpers here can help them come up with an answer. The helpers and mentors here are entirely voluntary, and provide help for zero financial reward. If you pose a question here so vague and ill-defined, it shouldn't be a surprise that you got the responses that you did.
 

Similar threads

  • · Replies 5 ·
Replies
5
Views
2K
  • · Replies 2 ·
Replies
2
Views
1K
  • · Replies 21 ·
Replies
21
Views
4K
  • · Replies 7 ·
Replies
7
Views
3K
  • · Replies 10 ·
Replies
10
Views
3K
  • · Replies 1 ·
Replies
1
Views
2K
Replies
1
Views
3K
  • · Replies 5 ·
Replies
5
Views
2K
  • · Replies 13 ·
Replies
13
Views
2K
  • · Replies 1 ·
Replies
1
Views
2K