Leybold PGA 100 mass spectrometer alignment instructions

14 replies · 3K views · last reply
Michael Koch
Messages
7
Reaction score
8
I have a Leybold PGA 100 mass spectrometer, including the instruction manual. The instrument is paired with a gauge head. If either the instrument or the gauge head is exchanged, then an alignment is required. It's mentioned in the instruction manual there exists a supplement, which contains the alignment instructions. Does anybody have these alignment instructions? I'm ready to pay for a photocopy.
Thanks,
Michael
 
Why would you have to pay? Is it not available online? How about from the company?
 
I wouldn't ask here if I hadn't already tried Google and the manufacturer. It's an old instrument and out of service for many years.
 
Can you post a copy of the cover page of the manual you have, and also a shot of where is mentions the alignment supplement? That might help us to try to look for it. Also paging @dlgoff @davenn @jim hardy
 
Here is the cover page of the manual and the second page, where the required supplement is mentioned.
Cover page of a Leybold AG operating instructions manual for the Quadruvac PGA 100 / PGA 100 CC / 100 LCU quadrupole mass spectrometer, with German, English and French titles and a colour-block graphic in grey, black and orange.
Page 2 of a multilingual operating manual for the QUADRUVAC PGA 100 Quadrupol mass spectrometer gauge, with German, English and French text in three columns under the headings Achtung, Important and Attention.
 
Attachments
  • Cover page of a Leybold AG operating instructions manual for the Quadruvac PGA 100 / PGA 100 CC / 100 LCU quadrupole mass spectrometer, with three-language titles and a multicolour geometric band at the bottom.
    leybold_1.jpg
    23.1 KB · Views: 617
  • Page 2 of a multilingual manual for the QUADRUVAC PGA 100 mass spectrometer, with German, English and French text in three columns under Achtung, Important and Attention headings.
    leybold_2.jpg
    44.5 KB · Views: 622
  • Cover page of a Leybold AG operating instructions manual for the Quadruvac PGA 100 / PGA 100 CC / 100 LCU quadrupole mass spectrometer, with German, English and French titles and a colour-block graphic in grey, black and orange.
    leybold_1.jpg
    23.1 KB · Views: 613
  • Page 2 of a multilingual operating manual for the QUADRUVAC PGA 100 Quadrupol mass spectrometer gauge, with German, English and French text in three columns under the headings Achtung, Important and Attention.
    leybold_2.jpg
    44.5 KB · Views: 643
  • Like
Likes   Reactions: davenn and berkeman
Michael Koch said:
I wouldn't ask here if I hadn't already tried Google and the manufacturer.

no probs, :smile: @berkeman had to ask the obvious, as a VERY high percentage of people ask here without ever doing any searches on even the most basic things

Michael Koch said:
Here is the cover page of the manual and the second page, where the required supplement is mentioned.

Thanks for that ...
I searched through a few old manual repositories that I am familiar with and didn't have any luck either
even searched youtube :rolleyes:

the only way you may get info is from some one who has one of these units

best of luck

Dave
 
  • Like
Likes   Reactions: berkeman and Michael Koch
Unfortunately these manuals aren't close enough. The leak detectors have a mass separator with a magnetic field, and they are tuned only for helium with mass 4. However the PGA 100 has a quadrupole separator and is tunable from mass 1 to 99. I have two PGA 100 instruments and one of them is defect. The measuring head was paired with the instrument that is now dead. When I use the working instrument with this head, then the mass spectrum is off by about one. The Argon peak is shown at 41, instead of 40 where it should be. The HF module has 14 potentiometers for adjustment. That's why I really need the instruction supplement. If there were only 2 or 3 potentiometer, I would simply try them out.
Michael
 
  • Like
Likes   Reactions: jim hardy
Michael Koch said:
The HF module has 14 potentiometers for adjustment.
Ouch! About 50 yrs ago I tuned a large Helium Leak Detector, which is rather simple... it took only a couple hours! You have a head start on yours, it's "only off by a little bit." :wink:

Try a search for Leybold PGA 100 using duckduckgo.com. https://duckduckgo.com/?q=leybold+pga+100
Of course the first hit is this thread! But if you read the results you will find an outfit in Germany that does servicing and further down the list there are several papers that mention they used that model in their research. As @davenn suggested above, hopefully you can find someone that is willing to send you a copy of the needed manual.

Good Luck! And keep us posted.
Tom
 
I did already contact the servicing company in Germany last week, but got no reply so far. May be they don't want to share the manual.
 
Good news. The repair was successful. The defect component revealed itself by a smoke signal.
Michael

Close-up of a green printed circuit board showing a row of gold pin headers, a burnt, blackened electrolytic capacitor with a charred top, and several DIP integrated circuits including a TI 74AS373N chip.
 
Attachments
  • Close-up photo of a green circuit board with a row of gold pin headers, a burnt and blackened electrolytic capacitor, blue and orange capacitors, and several TI integrated chips including an MM74HC373N latch.
    IMG_9809.jpg
    55.6 KB · Views: 553
  • Close-up of a green printed circuit board showing a row of gold pin headers, a burnt, blackened electrolytic capacitor with a charred top, and several DIP integrated circuits including a TI 74AS373N chip.
    IMG_9809.jpg
    55.6 KB · Views: 528
  • Like
Likes   Reactions: berkeman and davenn
I also figured out which of the 14 potentiometers must be adjusted for shifting the mass result. Now my two mass spectrometers are both working fine and have the peaks exactly where they should be.
Michael
 
  • Like
Likes   Reactions: berkeman, dlgoff and jim hardy
Nothing like the sweet taste of success Congratulations! This is how we learn. Look how much more you know about your machine now.
 
  • Like
Likes   Reactions: dlgoff and Michael Koch
Gotta love that smoke. :thumbup:
 
  • Like
Likes   Reactions: jim hardy and Michael Koch
That's the 'good' thing about Tantalum capacitors, their failure is spectacular! (assuming a hefty enough power supply.)

Congratulations!
 
  • Like
Likes   Reactions: Michael Koch and dlgoff