Maxwell's tensorial equations.

  • Level: Graduate 
  • Thread starter MathematicalPhysicist
  • Start date
7 replies · 3K views · last reply
Science Advisor
Gold Member
Messages
4,662
Reaction score
372
I wanto show that:
[tex]\partial_{\mu} T^{\mu \nu}=0[/tex] for
[tex]T^{\mu\nu} = F^{\mu \rho}\eta_{\rho\sigma}F^{\sigma \nu}+\frac{1}{4}\eta^{\mu\nu}F_{\rho\sigma}F^{\rho\sigma})[/tex]
by using Maxwell's equations.
Here are my steps (it's not for HW, I am auditing this course):
[tex]\partial_{\mu} T^{\mu \nu} = F^{\mu \rho}_{,\mu} \eta_{\rho \sigma} F^{\sigma \nu} + F^{\mu \rho} \eta_{\rho \sigma} F^{\sigma \nu}_{,\mu} + \frac{1}{4} \eta^{\mu \nu} (F_{\rho \sigma , \mu} F^{\rho \sigma}+F_{\rho \sigma} F^{\rho \sigma}_{,\mu})[/tex]

I can't see the forrest from the trees, can someone hint me how to simplify this?

Thanks.
 
You need to use the Maxwell equations written in terms of F, i.e. [tex]\nabla_a F^{ab} =0[/tex] (kills your first term for e.g.) and [tex]\nabla_{[a}F_{bc]}=0[/tex]

and remember that F is antisymmetric itself, which simplifies the second equation somewhat to [tex]\partial_a F_{bc}+\partial_b F_{ca}+\partial_c F_{ab} =0[/tex]. You also have met compatibility and can relabel dummies and use the symmetry and antisymmetry of F, this should do the trick.

I think you will find you need to factor out an F after this, and then massage the rest into a form where you can use the second Maxwell relation by using symmetries and relabelling dummies, and then by the second equation you will get identically zero.
 
So I get now:
[tex]F^{\mu \rho}_{,\mu} \eta_{\rho \sigma} F^{\sigma \nu} + F^{\mu \rho} \eta_{\rho \sigma} F^{\sigma \nu}_{,\mu} + \frac{1}{4} \eta^{\mu \nu} (F_{\rho \sigma , \mu} F^{\rho \sigma}+F_{\rho \sigma} F^{\rho \sigma}_{,\mu})=<br /> F^{\mu}_{\sigma , \mu} F^{\sigma \nu} + F^{\mu \rho}F^{\nu}_{\rho , \mu} -\frac{1}{4}[ F_{\rho \sigma , \nu} F^{\rho \sigma} +F_{\rho \sigma}F^{\rho \sigma}_{,\nu}][/tex]

How to procceed here? what is the compatibiliy condition here?

Thanks.
 
Have you thought about working out [tex]F^{\mu\rho}_{,\mu}[/tex] in terms of the 4-potential. You'll get two terms and there will be one free index and two dummy ones. You can swap the dummy indices but when you do that for F you'll pick up a minus sign and the terms will add giving you one term. Then you can argue its zero because its the product of an antisymmetric part and a symmetric part.

I tend to have to write things out because I'm still new to this stuff and so I can't do it all just using F yet. Just a thought.
 
I'm not sure exactly what you've done here. Starting with (where I used Maxwell 1 to rid the first term): [tex] \eta_{cd}F^{ac} \ F^{bd}_{,a} - \frac{1}{4} \eta^{ab} (F_{cd , a} F^{cd}+F_{cd} F^{cd}_{,a})[/tex]

[tex] \eta_{cd}F^{ac} \ F^{bd}_{,a} - \frac{1}{2} \eta^{ab} F^{cd} F_{cd , a}[/tex]

antisym of F:

[tex] \eta_{cd}F^{ac} \ F^{bd}_{,a} + \frac{1}{2} \eta^{ab} F^{dc} F_{cd , a}[/tex]

swap dummies a<->d on second term:

[tex] \eta_{cd}F^{ac} \ F^{bd}_{,a} + \frac{1}{2} \eta^{db} F^{ac} F_{ca , d}[/tex]

now pull out the factor of F, and I use metric sym:

[tex] F^{ac}\left[\eta_{cd} F^{bd}_{,a} + \frac{1}{2} \eta^{bd}F_{ca , d}\right][/tex]

Because your in flat space the metric is constant so can be brought inside the partial derivs to raise/lower indices at will (in a curved space where your commas go to semicolons one would use metric compatability [tex]g_{ab;c}=0[/tex] at this stage):

[tex] F^{ac}\left[\eta_{cd}\eta^{be}\eta^{df} F_{ef,a} + \frac{1}{2} \eta^{bd}F_{ca , d}\right][/tex]

Now use [tex]\eta_{cd}\eta^{df}=\delta^{f}_{c}[/tex]

[tex] F^{ac}\left[\eta^{be} F_{ec,a} + \frac{1}{2} \eta^{bd}F_{ca , d}\right][/tex]

Relabel the dummie e <->d in first term, then pull out a factor of the metric too:

[tex] F^{ac}\eta^{bd}\left[ F_{dc,a} + \frac{1}{2} F_{ca , d}\right][/tex]

Now this can be written as:

[tex] F^{ac}\eta^{bd}\left[\frac{1}{2} F_{dc,a} +\frac{1}{2} F_{dc,a}+ \frac{1}{2} F_{ca , d}\right][/tex]

All you have to do now is use the antisymmetry on F and symmetry on the metric, and relabel a few indices to manipulate the above in a form where the indices are correct to use Maxwell 2 : [tex] \partial_a F_{bc}+\partial_b F_{ca}+\partial_c F_{ab} =0[/tex] which will then be identically zero. (Note indices must end up cyclic)
 
THanks.

As for the last eq.
[tex]F^{ac}\eta^{bd}\left[\frac{1}{2} F_{dc,a} +\frac{1}{2} F_{dc,a}+ \frac{1}{2} F_{ca , d}\right][/tex]
if I plug:
[tex]F_{dc,a}= F_{ad,c}[/tex]
then I am done right?
 
So the first term is:

[tex]F^{ac}\eta^{bd} F_{dc,a}[/tex]

antisym of F:[tex]-F^{ac}\eta^{bd} F_{cd,a}[/tex]

now swap a<->c dummies:

[tex]-F^{ca}\eta^{bd} F_{ad,c}[/tex]

antisym on first F:[tex]F^{ac}\eta^{bd} F_{ad,c}[/tex]

so yep, you can do that (and the factor outside remains the same), so now it vanishes via second Maxwell.