Pressure exerted in an elevator

  • Thread starter Thread starter KingTutATL
  • Start date Start date
  • Tags Tags
    Elevator Pressure
Join the discussion
Registration is free. Ask a follow-up in this thread, or start your own.
5 replies · 9K views
KingTutATL
Messages
11
Reaction score
0
A suitcase (mass m=16kg) is resting on the floor of an elevator. The part of the suitcase in contact with the floor measures 0.50m by 0.15m. The elevator is moving upward, the magnitude of its acceleration being 1.5m/s^2. What pressure (in excess of atmospheric pressure) is applied to the floor beneath the suitcase?

This problem isn't too hard. Elevator is going up so the pressure will be greater than normal produced by the suitcase. Take the area of the suitcase and continue from there?
 
Physics news on Phys.org
KingTutATL said:
A suitcase (mass m=16kg) is resting on the floor of an elevator. The part of the suitcase in contact with the floor measures 0.50m by 0.15m. The elevator is moving upward, the magnitude of its acceleration being 1.5m/s^2. What pressure (in excess of atmospheric pressure) is applied to the floor beneath the suitcase?

This problem isn't too hard. Elevator is going up so the pressure will be greater than normal produced by the suitcase. Take the area of the suitcase and continue from there?
What is the force exerted on the suitcase by the floor? What is the area over which this force acts? That should be all you need.

AM
 
When calculating the force do I just add 1.5m/s^2 to 9.8m/s^2 and then calculate the force per area from there?
 
KingTutATL said:
When calculating the force do I just add 1.5m/s^2 to 9.8m/s^2 and then calculate the force per area from there?
Conceptually, the acceleration and gravity are different. You would add the force of gravity (weight) which the floor applies with no acceleration, to the force which the elevetor applies to accelerate the suitcase:

[tex]F_{normal} = ma + mg[/tex]

AM
 
Of course, that's just
[tex]F_{normal}= m(a+ g)[/tex]
as KingTutAtl asked.
 
HallsofIvy said:
Of course, that's just
[tex]F_{normal}= m(a+ g)[/tex]
as KingTutAtl asked.
Of course. I should have begun my answer with: "Yes, provided you multiply by the mass". It appeared to me that the op was uncertain as to why you would add them together, since there is no acceleration due to gravity.

AM
 
Last edited: