Secret Bookcase Door Switch - Help?

  • Thread starter Thread starter proudfoo
  • Start date Start date
  • Tags Tags
    Bluetooth Switch
Click For Summary
SUMMARY

The discussion centers on creating a secret bookcase door that unlocks when two brass busts are touched simultaneously. Participants suggest using capacitive touch sensors, specifically the MPR121 Capacitive Touch Sensor Breakout Board, to complete the circuit without passing current through the human body. Concerns about safety and power failure lead to alternative suggestions, such as mechanical interlocks or RFID technology for unlocking. The consensus is that while combining the concepts is feasible, a simpler and safer method is preferable.

PREREQUISITES
  • Understanding of capacitive touch sensor technology
  • Familiarity with electrical circuits and safety
  • Knowledge of mechanical interlock systems
  • Basic concepts of RFID technology
NEXT STEPS
  • Research the MPR121 Capacitive Touch Sensor Breakout Board
  • Explore mechanical interlock designs for secret doors
  • Investigate RFID technology for secure access systems
  • Learn about safety measures in electrical circuit design
USEFUL FOR

Electrical engineers, DIY enthusiasts, and hobbyists interested in home automation and secret compartments will benefit from this discussion.

proudfoo
Messages
2
Reaction score
0
Hey folks -

Question. I'm working on a secret door disguised as a bookcase and I'm looking for some help from a curious and knowledgeable electrical engineer about a clever way to make the lock open.

The desired effect is for the opener to touch two brass busts on the bookshelf simultaneously and the deadbolt will unlock and the bookshelf/door will open.

I'm wondering if these two concepts can be combined:

1. A stick that shows that the human body is a conductor (right word?).
http://www.stevespanglerscience.com/lab/experiments/human-circuit

2. A new type of deadbolt that (if you have the bluetooth fob) opens by touching the deadbolt rose.
https://www.amazon.com/dp/B00CPTD5AQ/?tag=pfamazon01-20

Is it possible to combine them or will the power required to work the lock shock/kill the person who acts to complete the circuit?

My plan was to cut the wire that connects the deadbolt rose to the main servo and then run that to both busts and then run another wire from either bust directly to the deadbolt rose to simulate the touching. Then, when somebody touches both busts, the circuit will be complete and the lock will open?

Is this a good or bad idea? Is there a simpler method? Don't say use a key. ;)

Thanks!
 
Last edited by a moderator:
Engineering news on Phys.org
No problem to combine both ideas, but not by passing the current through the body. More like shorting brass busts should trigger the switch opening the bolt.
 
Great! Can you explain what that means and how I might set it up?

Thanks!

Ben
 
You might want to use two capacitive touch sensors, so that both must be energized simultaneously, for instance, to unlock your secret compartment.

MPR121 Capacitive Touch Sensor Breakout Board
https://www.sparkfun.com/products/9695

A veritable shopping list of suppliers:
http://www.mouser.com/Sensors/Capacitive-Touch-Sensors/_/N-1b8oy
 
Last edited by a moderator:
What happens when the house power fails, or your battery goes dead?

IMO, it's best to use mechanical interlocks for things like this. Heck, just make a flush button near the back of one of the shelves and put books in front of it. Especially if you put it on the underside of the 2nd-to-bottom shelf at the back, it will be virtually impossible to find.

What'cha going to put in your hidden closet? :smile:
 
Hey, Berkeman, isn't it obvious: That's where he is going to hide the bodies!
 
My Christmas tree lights have a brass ornament that hangs on the tree. You touch it to turn the lights on and off. You could buy two of those and bust them open.
 
I agree with Berkeman

seems a bit extreme for a no security lock. be easier to use a mechanical switch like pushing in the kicker with your toe unlatches the unit to swing or slide out which would solve the no power issue. the other way could be use the same finger print swipe's as laptops one on each bust which means only registered users can actually unlock the door.
 
Temperature sensors in the busts that measure a rise in temperature if the busts are held.
 
  • #10
Oh, hell. Just get an RFID chip implanted in your arm and be done with it.
 
  • Like
Likes   Reactions: timthereaper

Similar threads

  • · Replies 6 ·
Replies
6
Views
8K
  • · Replies 6 ·
Replies
6
Views
3K
  • · Replies 3 ·
Replies
3
Views
3K
  • · Replies 1 ·
Replies
1
Views
10K