Simple lever calculation- help with giving it notations

  • Thread starter Thread starter Robbie E Sayers
  • Start date Start date
  • Tags Tags
    Calculation Lever
AI Thread Summary
The discussion focuses on simplifying the lever formula for easier memorization in a mechanical engineering course. The original formula presented is Effort = (Load x Load to fulcrum distance) / Effort to fulcrum distance. The user seeks recognized notations to replace the lengthy variable descriptions with shorter symbols. Suggestions for standard notations in mechanical engineering are encouraged, referencing external links for additional context. Simplifying the formula will aid in better retention and understanding of lever mechanics.
Robbie E Sayers
Messages
1
Reaction score
1
TL;DR Summary
Substituting the long sentences (which denote a variable) for more recognised, much shorter notations in mechanical engineering.
My course has a module in mechanical engineering. The handout i was given for this one is:

Effort = (Load x Load to fulcrum distance) / Effort to fulcrum distance

my problem is memorising the formula, I am not used to formulas that use sentences to denote a variable. I am simply here to ask for recognised and much shorter notations in mechanical engineering so that i can substitute these sentences for so I can remember it.
 
Engineering news on Phys.org
Welcome, Robbie!
Please, read through these links for reference:

https://en.wikipedia.org/wiki/Lever

https://en.wikipedia.org/wiki/Mechanical_advantage


basic-parts-of-a-lever-1_ver_1.png
 
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...
Back
Top