Understanding Modern Digital System Design for Incoming Freshmen

Click For Summary
SUMMARY

The discussion centers on the Modern Digital System Design course at Texas Tech University, which covers fundamental concepts such as basic gates, boolean logic, Karnaugh maps, state machines, and CISC/RISC computer architectures. Incoming freshmen are advised to prepare by exploring digital system design tutorials and reading "The Art of Electronics" by Horowitz and Hill for a solid foundation in basic circuits. The course includes practical lab work, enhancing the learning experience through hands-on application of theoretical concepts.

PREREQUISITES
  • Basic understanding of digital circuits
  • Familiarity with boolean logic and Karnaugh maps
  • Knowledge of CISC and RISC computer architectures
  • Mathematics proficiency as per MPE requirements
NEXT STEPS
  • Explore online digital system design tutorials
  • Read "The Art of Electronics" by Horowitz and Hill
  • Study the structure of digital systems on Wikipedia
  • Practice designing combinational and sequential digital systems
USEFUL FOR

This discussion is beneficial for incoming freshmen in electrical engineering, educators preparing course materials, and anyone interested in foundational concepts of digital system design.

mlowery
Messages
23
Reaction score
0
I will be taking Modern Digital System Design during the Fall 2006 semester at Texas Tech University. As I am an incoming freshman, I have nobody to consult about this class. If someone could please tell me what this class is about, what I should be expecting, and/or what I can do to prepare for it, I would greatly appreciate it.

Thanks,
Mitchell
 
Engineering news on Phys.org
I googled digital system design tutorial, and got lots of hits. Here's the hit list:

http://www.google.com/search?hl=en&q=digital+system+design+tutorial

You can browse around some of those pages, and that will start to give you a feel for what you'll be studying. The class will most likely start out with basic gates, then boolean logic, then Karnaugh maps for designing boolean logic, then state machines for designing synchronous logic blocks. And then you'll probably study CISC and RISC computer architectures at the logic block level. You'll hopefully have a lab with the class, where you get to design and build up some of these things that you're learning about.

It's a pretty fun subject, and very practical. You'll use the concepts a lot in your EE work, in just about anyone of the specialties. BTW, I'd recommend that you check out the book "The Art of Electronics" by Horowitz and Hill. If you can read that book cover-to-cover before school starts, you'll have a great foundation in basic circuits. Have fun!
 
Thank you very much berkeman. That is extremely helpful.
 
it seems you are taking this course?

2372. Modern Digital System Design (3:3:0). Prerequisite: Score on Mathematics Placement Examination (MPE) of 7, MATH 1350, 1550, or score on MPE of 5 and MATH 1321. An introduction to combinational and sequential digital systems.

See http://en.wikipedia.org/wiki/Digital_circuit, especially the subsection Structure of Digital Systems (http://en.wikipedia.org/wiki/Digital_circuit#Structure_of_digital_systems)

While that article has much more detail than you will probably cover, I imagine most of the "structure of digital systems" section will be covered and/or focused on.
 
Last edited by a moderator:
Thank you. That was very helpful. Sorry for the delayed reply.
 

Similar threads

Replies
2
Views
2K
  • · Replies 4 ·
Replies
4
Views
3K
  • · Replies 2 ·
Replies
2
Views
1K
Replies
17
Views
5K
Replies
16
Views
3K
  • · Replies 19 ·
Replies
19
Views
4K
  • · Replies 4 ·
Replies
4
Views
2K
  • · Replies 1 ·
Replies
1
Views
2K
  • · Replies 5 ·
Replies
5
Views
4K
Replies
2
Views
3K