What Is Negative Resistance and How Does It Affect Electrical Current Flow?

Click For Summary
SUMMARY

Negative resistance refers to a phenomenon where an object actively draws electrical current, effectively encouraging current flow. This concept is exemplified by components like tunnel diodes, which exhibit a negative incremental resistance in specific voltage regions. While negative resistors as discrete components do not exist, negative resistance is measurable and can be observed in devices such as fluorescent lamps. Understanding this behavior is crucial for applications in circuit theory and energy sources.

PREREQUISITES
  • Understanding of electrical resistance and conductance principles
  • Familiarity with voltage-current relationships (Ohm's Law)
  • Knowledge of semiconductor devices, particularly tunnel diodes
  • Basic concepts of circuit theory and energy sources
NEXT STEPS
  • Research the characteristics and applications of tunnel diodes
  • Explore the concept of negative incremental resistance in circuit design
  • Study the behavior of fluorescent lamps in relation to negative resistance
  • Investigate circuit theory related to negative impedance gyrators
USEFUL FOR

Electrical engineers, circuit designers, and students studying semiconductor physics will benefit from this discussion on negative resistance and its implications in electrical current flow.

rollcast
Messages
403
Reaction score
0
Lets see if I understand this one correctly.

Basically negative resistance is when an object actively draws electrical current through it. The object almost encourages current to flow through it?

Thanks
AL
 
Engineering news on Phys.org
That description sounds about right to me, but I think that resistance has a lower bound of 0 because if it actively draws the current, then it does not resist the current.

In another way, the measure of conductance (1/R) describes how well a conductor allows a current flow through it. With a resistance of 0, the conductance would be infinite, but if you have a negative resistance, say -1 KOhm, that would be -.001 Siemens. This negative conductance says that it resists the flow of the current while the negative resistance says that it freely allows the current.

Maybe someone else will come along that has a more refined answer.
 
Resistance is defined as V/I for DC. It can be positive, negative, zero or unbounded.
 
rollcast said:
Lets see if I understand this one correctly.

Basically negative resistance is when an object actively draws electrical current through it. The object almost encourages current to flow through it?

Thanks
AL

You're looking at it the wrong way,

Let's say you put a voltage across a material with finite and positive resistance. Now you keep replacing the material such than the resistance goes from finite positive value to finite negative value. At first the current will increase and reach positive infinity when the resistance drops to just above zero (0^{+}). When resistance becomes just below zero (0^{-}) the current will become negative infinity. When the resistance comes to finite negative value the current will be finite negative.

Now the behavior of a load is, you put a voltage across it and the current goes into it from positive terminal and the behavior of a source is you put a voltage across it and current still comes out from it from the positive terminal.

Thus the negative resistance material acts as a source. The difference between true source and this thing is in true source you don't even need to put voltage to get current. But here you have to bias the thing to get current. Like attach with a dead battery and it gets charged with additional circuitry.

Any material having bias point in 2nd or 4th quadrant will be energy source. e.g. ILLUMINATED solar cell.
 
rollcast said:
Lets see if I understand this one correctly.

Basically negative resistance is when an object actively draws electrical current through it. The object almost encourages current to flow through it?

Thanks
AL

wiki said:
Negative resistors are theoretical and do not exist as a discrete component.

ps. wiki also has entries on Faeries.
 
Negative resistors do not exist, but negative resistance is very real and measurable.

It comes in various forms, but one is the tunnel diode.

If you pick one up and measure it for voltage, there isn't any.

However, when you connect it to a power source and start increasing the voltage, the current increases in the normal direction (positive to negative).
As you increase the voltage more, the current starts to decrease, but it never drops to zero or reverses. Then if you increase the voltage even more, the current starts to rise again and continues rising with voltage.

The region where current is dropping with increasing voltage is called a negative resistance region.

At no stage does the tunnel diode generate power itself and the dissipation in it is power that comes from the power supply.
 
Vk6kro is right but we should properly call it negative incremental resistance. The tunnel diode has a positive resistance everywhere with a negative differential or incremental resistance in the special region.

An even more common example of this is the fluorescent lamp.
 
A quick google of 'negative resistance or negative impedance gyrator' will get you all the circuit theory and implementation you require.

PS As others have said, don't rely on Wiki.
 

Similar threads

Replies
8
Views
4K
  • · Replies 3 ·
Replies
3
Views
2K
  • · Replies 10 ·
Replies
10
Views
2K
  • · Replies 19 ·
Replies
19
Views
6K
  • · Replies 7 ·
Replies
7
Views
2K
  • · Replies 17 ·
Replies
17
Views
924
  • · Replies 10 ·
Replies
10
Views
2K
  • · Replies 8 ·
Replies
8
Views
1K
  • · Replies 28 ·
Replies
28
Views
1K
  • · Replies 18 ·
Replies
18
Views
5K