Time required to raise Temperature knowing heat transfer rate

AI Thread Summary
To determine how long it takes to lower a fluid's temperature from T0 to Tf using a known heat transfer rate q, it's essential to consider that the heat transfer rate typically varies with the temperature difference. If q remains constant, the specific heat of the body can be used to calculate changes in heat content as heat is removed. Additionally, heat transfer complexities arise from the movement of heat from the body's interior to its surface, which can be simplified if the body's thermal conductivity is significantly higher than that of the fluid. For accurate calculations, referencing specific heat, thermal conductivity, and Newton's law of cooling is recommended. Understanding these principles is crucial for solving the heat transfer problem effectively.
Tamarisk
Messages
1
Reaction score
0
Knowing the heat transfer rate q, how long does it take to lower a fluid from temperature T0 to Tf?

This is for convective heat transfer from a heated body submerged in a fluid.
I'm looking for an appropriate formula (google isn't helping)

Thanks!
 
Physics news on Phys.org
Tamarisk said:
Knowing the heat transfer rate q, how long does it take to lower a fluid from temperature T0 to Tf?

This is for convective heat transfer from a heated body submerged in a fluid.
I'm looking for an appropriate formula (google isn't helping)

Thanks!

It's unlikely that the heat transfer rate will remain constant as the temperature difference changes; Usually the rate is proportional to temperature difference. If for some reason the heat transfer rate is kept constant in some fashion, then you can use the specific heat of the body (a constant for a given substance) to work out the body's heat content at a given temperature, and thus how it changes as heat is removed. Look up "specific heat". Your heat transfer rate, q, will tell you the rate that the heat content is changing.

Other issues arise with the rate that heat can move from the insides of the body to the surface where it can depart to the surrounding medium. This is a much more complex problem. However, if the thermal conductivity of the submerged object is much greater than the conductivity between the body/fluid interface, then the effects may be negligible. Look up "heat conductivity" or "thermal conductivity".

Also look up "Newton's law of cooling".
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
I was thinking using 2 purple mattress samples, and taping them together, I do want other ideas though, the main guidelines are; Must have a volume LESS than 1600 cubic centimeters, and CAN'T exceed 25 cm in ANY direction. Must be LESS than 1 kg. NO parachutes. NO glue or Tape can touch the egg. MUST be able to take egg out in less than 1 minute. Grade A large eggs will be used.
Back
Top