Dissolving carbon dioxide from air without dissolving any other gases.

AI Thread Summary
A high school science research team is exploring a project involving a machine designed to dissolve CO2 from air. They are seeking solutions for effectively dissolving CO2, considering options like water and monoethanolamine (MEA). The discussion highlights the importance of understanding gas solubility, referencing Henry's Law to determine the pressure required for gas dissolution in liquids. It notes that CO2 reacts with water to form carbonic acid, which complicates the dissolution process. MEA is mentioned as a viable option for CO2 scrubbing, as it can enhance CO2 absorption when neutralized. The conversation also suggests exploring various methods of CO2 scrubbing used in confined environments, such as submarines and spacecraft.
nst.john
Messages
163
Reaction score
1
Hello,

Me and two other people are doing a science research competition for high school students and for our project we thought of a machine that takes in air through a pump and dissolves CO2 and only CO2. The problem is I don't know what to put in for a solution or pure liquid that would dissolve the CO2. I thought about water but I don't know how to find the pressure needed to dissolve a gas, and also heard about monoethanolamine which dissolves CO2 but don't know how to make it or if it would be very effective. If you can either give me an equation or method to finding the pressure needed to dissolve gases in water, or if MEA is effective or any other methods to do this that would be great.

Thanks!
 
Chemistry news on Phys.org
For a simple dissolution check the Henry's law. In the case of CO2 things get more complicated, as CO2 reacts with water creating carbonic acid, if it gets neutralized, more CO2 can be dissolved. That's more or less how MEA works, but it is also possible with any base - it is just the further separation that can make some substances better.

Also, see http://www.sciencedirect.com/science/article/pii/036031999500007Z
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
I was introduced to the Octet Rule recently and make me wonder, why does 8 valence electrons or a full p orbital always make an element inert? What is so special with a full p orbital? Like take Calcium for an example, its outer orbital is filled but its only the s orbital thats filled so its still reactive not so much as the Alkaline metals but still pretty reactive. Can someone explain it to me? Thanks!!
I'm trying to find a cheap DIY method to etch holes of various shapes through 0.3mm Aluminium sheet using 5-10% Sodium Hydroxide. The idea is to apply a resist to the Aluminium then selectively ablate it off using a diode laser cutter and then dissolve away the Aluminium using Sodium Hydroxide. By cheap I mean resists costing say £20 in small quantities. The Internet has suggested various resists to try including... Enamel paint (only survived seconds in the NaOH!) Acrylic paint (only...
Back
Top