Register to reply

Simple question regarding the Ah rating of a battery

by motivehunter
Tags: battery, current, discharge, time
Share this thread:
May12-13, 06:56 AM
P: 12
Hi all!

Excuse the simple nature of this question, but i'm a mechanical engineer working on building his own PAS bicycle and need to understand this to go ahead with my work.

I understand that a 12V 7.2 Ah battery ideally discharges 7.2 ampere of current at a nominal voltage of 12V for 1 hour. But in reality, it is only capable of doing this for 45 minutes.

So am I correct in assuming that as the battery is an SLA (sealed lead-acid), if the application demands 20A, it will deliver the current at nominal voltage for 16.2 minutes? I mean, is this relationship linear?

Thanks in advance!
Phys.Org News Partner Engineering news on
'Smart material' chin strap harvests energy from chewing
Lockheed Martin advances live, virtual, constructive training in flight test
Lockheed Martin conducts flight tests of aircraft laser turret for DARPA
May12-13, 07:07 AM
HW Helper
P: 5,483
The concept of ampere-hours does lead you to expect that. But in practice, the heavier the current, the less realistic that is. From a 7.2AH battery you may get only 6 to 10 minutes at 20A before the voltage sags too low to be useful.
May12-13, 07:09 AM
P: 12
Thank you so much!

May12-13, 08:18 AM
P: 25
Simple question regarding the Ah rating of a battery

In theory its linear yes, again just like NascentOxygen said it will drop too much after 10 minutes which makes it useless. If the manufacturer says it discharges that in 1 hour in practice you need to consider less than that, probably even less than 45 mins. It also depends on the battery's age.

Register to reply

Related Discussions
Simple Battery Explanation General Physics 15
I need some help with a simple, battery-powered car... Mechanical Engineering 2
Simple battery question - which one to use? Electrical Engineering 3
Bearing failure rating? Simple rev counter? General Engineering 7
Bearing failure rating? Simple rev counter? Mechanical Engineering 2