The Bloom Box: Could it Power Our Homes? | CBS 60 Minutes Report

In summary: What about the Bloom Box itself?The industrial version of the Bloom Box is already being used by a number of companies, such as Google, Ebay, and Walmart.
  • #1
DR13
150
0
Did anyone see the 60 minutes piece on the Bloom Box that was on last night? Do you guys think that this is a viable option in the alternative energy? Do you think that this could actually power all of our homes in the next decade or so?

Link to the report: http://www.cbsnews.com/video/watch/?id=6228923n"
 
Last edited by a moderator:
Engineering news on Phys.org
  • #2


This is an interesting development, the real question is how much more efficient is this than current power generation tech? You still need fuel, for example gasoline, but a slow chemical reaction could be orders of magnitude more efficient than combustion.

I guess we'll find out Wednesday. Every bone in my body wants to declare shenanigans, but this so far appears to be legitimate. What is especially interesting is that many companies such as Google, Ebay, and Walmart are already using the industrial version of the Bloom Box.
 
  • #3


I'd buy one if it made Stouts and Porters. :-p
 
  • #4


Maybe we should combine this string and the one I started yesterday. in the Electrical Engineering section.

KM
 
  • #5


How much more efficient do these boxes make energy (eg we put in X amount and we get out X + more)? Or am I misunderstanding what these boxes do?
 
  • #6


Well you can never get in more than you put out, but you can get closer to 100% efficiency.

Think of a gasoline engine in a car, only a small amount of the chemical potential energy in the gasoline is converted into kinetic energy, a lot is lost in the form of heat.
 
  • #7


If you want electrical power I would have thought it was difficult to make a fuel cell that is LESS efficent than combustion->heat->expansion->piston/turbine->generator.

But if you want rotary motion then fuel->expansion->piston->crank is better than fuel cell->electricity->motor.
 
  • #8


Its nothing more than another flavor of a SOFC (Solid Oxide Fuel Cell). The "bloom box" is not some new source of energy, its an energy conversion device based on the same electrochemical principles that all other fuel cells use. And so far, Bloom Energy has made no claims that most other fuel cell companies can not. Until they make claims of conversion efficiency of over 75%, lifetime of 100k+ hours, and a very low price tag (from the video, they are no where close), its just another overrated start-up.

BTW, you will never have one of these in your home unless you live in a very rural area. No one is going to trade electric wires for gas lines going to their house and pay an extra premium for it. Doing such a thing would be asinine.
 
  • #9


TaylorRatliff said:
Well you can never get in more than you put out, but you can get closer to 100% efficiency.

Think of a gasoline engine in a car, only a small amount of the chemical potential energy in the gasoline is converted into kinetic energy, a lot is lost in the form of heat.

Yeah, ok, that is what I meant

And sorry Kenneth Mann I didnt see your thread. I would think combining them would be fine.
 
  • #10


mgb_phys said:
But if you want rotary motion then fuel->expansion->piston->crank is better than fuel cell->electricity->motor.

How do you figure? An ICE engine has 35% mechanical efficiency tops. Most never come anywhere close to that. SOFCs are usually 65-70% efficient, PEMFCs about 50%, and electric drive systems are around 95% efficient.

0.65*0.95 = 62% overall efficiency for a SOFC.

62% > 35%

I don't see how thermal engines are better? :confused:
 
  • #11


Topher925 said:
Its nothing more than another flavor of a SOFC (Solid Oxide Fuel Cell). [...] And so far, Bloom Energy has made no claims that most other fuel cell companies can not.
That's odd. Though there are several firms claiming they have products in development and are running demonstration projects, I can not find a single SOFC firm that is actually in production with a model competitive with Bloom. Australian based Ceramic Fuel Cells Ltd seems to be closest as they have some demonstration projects but they are also http://www.cfcl.com.au/FAQs/#4" .

A comparable SOFC firm would have a turnkey residential/office size or larger compatible fuel cell in commercial production now, uses natural gas fuel with a 50% or better hydrocarbon-to-AC-electricity rating, with an upfront cost of $7.5 per Watt or better. For that matter, the only fuel cell firm I can find using any technology, not just SOFC, that is in the ball park with Bloom is Fuel Cell Energy in Connecticut; they cite http://www.fuelcellenergy.com/files/FCE%20DFC300_Product_Sheet_032508.pdf" . (That 3% difference is worth $7.2 million / year at 10 cents/kWh)
 
Last edited by a moderator:
  • #12


Topher925 said:
How do you figure? An ICE engine has 35% mechanical efficiency tops. Most never come anywhere close to that. SOFCs are usually 65-70% efficient,
In one includes the reformer, I believe that's high by 10-15%. Theoretical or demonstration projects may do better but nothing actually on the market does. Still I agree no ICE will be more efficient than a fuel cell + electric motor.
 
  • #13
I though SOFCs were nearer 50% - and that assumed running them on hydrogen ?
Common rail turbo-diesel are almost 50%

If you can get 65-70% from a SOFC on a reasonable fuel (CNG/diesel/LPG) that would be interesting
 
  • #14
mgb_phys said:
Common rail turbo-diesel are almost 50%
Do you know of a make/model? I heard of large marine diesels getting close to that but not locos. I thought most of the loco diesels in service were more like high 30's -40's.
 
  • #15


mheslep said:
(That 3% difference is worth $7.2 [STRIKE]million [/STRIKE]/ year at 10 cents/kWh)
Thousand.:redface:
 
  • #16


I guess I missed the 60 Minutes piece the first time around (back in February); but I saw it in re-run last night.

Topher925 said:
BTW, you will never have one of these in your home unless you live in a very rural area. No one is going to trade electric wires for gas lines going to their house and pay an extra premium for it. Doing such a thing would be asinine.

That's exactly what I thought when I saw the piece. And just because NG is cheep now doesn't mean it will be next year.

Also, they said the unit used "half" the NG as conventional power generation combustion turbines. I'm thinking that's good, but it's still making a hell of a lot of CO2 compared to, say, nuclear...
 
  • #17


gmax137 said:
I guess I missed the 60 Minutes piece the first time around (back in February); but I saw it in re-run last night.

That's exactly what I thought when I saw the piece.
Agreed. They're essentially suggesting replacing the E grid with a NG pipeline grid, to gain, what?
And just because NG is cheep now doesn't mean it will be next year.
Given the shale gas reserves in the US reasonable gas prices are nearly certain at least in the near term.

Also, they said the unit used "half" the NG as conventional power generation combustion turbines.
I missed "half". Bloom claims 50% efficiency, which is good but nowhere near twice as good as combustion, so 'half' the NG must be a bogus claim.

I'm thinking that's good, but it's still making a hell of a lot of CO2 compared to, say, nuclear...
True, but it sure would take a great deal of the difficulty out of reducing CO2 by pushing coal aside. Plus FC's like this can be supplemented with biogas, which would net out CO2 to near zero.
 
  • #18
On 24 February 2010, Sridhar told Todd Woody of The New York Times that his devices are making electricity for 8–10 cents/kWh using natural gas, which is cheaper than today's electricity prices in some parts of the United States, such as California.http://sunrent.de/smileyhappy.ico Twenty percent of the Bloom Energy Server cost savings depend upon avoiding transfer losses that result from energy grid use.

Bloom Energy is developing Power Purchase Agreements to sell the electricity produced by the boxes, rather than sell the boxes themselves, in order to address customers' fears about box maintenance, reliability and servicing costs.http://sunrent.de/smileyhappy.ico

Fifteen percent of the power at eBay is created with Bloom technology; after tax incentives that paid half the cost eBay expects "a three-year payback period" for the remaining half, based on California's $0.14/kWh cost of commercial electricity.http://sunrent.de/smileyhappy.ico
 
  • #19
sonnenenergie said:
Twenty percent of the Bloom Energy Server cost savings depend upon avoiding transfer losses that result from energy grid use.
Bloom Energy is developing Power Purchase Agreements to sell the electricity produced by the boxes, rather than sell the boxes themselves,[/PLAIN]

how do these two statements work? If 20% of the efficiency comes from not using the grid, then how do you sell the power, other that "rent a bloom" and pay the energy costs + their rent on the unit?

That then puts the household consumer out of the loop, or gets you caught in a monopoly of "I unhooked from the grid, and use a bloom box, so must pay what they say" instead of outright purchase.

Based upon the fact that they want to only "rent" them, now I have to wonder what realistic life cycle and repair costs would be after 3-5 years. The real advantage in ICE's is that in all reality they can be overhauled numerous times for significantly less cost than replacing them (assuming the thing was properly maintained)

dr
 
  • #20
sonnenenergie said:
On 24 February 2010, Sridhar told Todd Woody of The New York Times that his devices are making electricity for 8–10 cents/kWh using natural gas...
...not including the depreciation of the Bloom Box itself, of course.
 
  • #21
dr dodge said:
The real advantage in ICE's is that in all reality they can be overhauled numerous times for significantly less cost than replacing them (assuming the thing was properly maintained)
How do you know that there's any advantage over the Bloom Box? That is, why couldn't the BB be similarly overhauled if need be?
 
  • #22
how do these two statements work? If 20% of the efficiency comes from not using the grid, then how do you sell the power, other that "rent a bloom" and pay the energy costs + their rent on the unit?

I question this as well. Since on average the grid is about 93% efficient at delivering electricity the above statement makes no sense to me either.

dr dodge said:
The real advantage in ICE's is that in all reality they can be overhauled numerous times for significantly less cost than replacing them (assuming the thing was properly maintained)

FCs actually have the advantage when it comes to overhaul. FCs themselves are much simpler and easier to service than a comparable ICE and the systems are almost always modular. They are also a lot more fun to take apart since you don't get covered in oil and muck.
 
  • #23


gmax137 said:
Also, they said the unit used "half" the NG as conventional power generation combustion turbines. I'm thinking that's good, but it's still making a hell of a lot of CO2 compared to, say, nuclear...

Right. And some of the guys are talking of "orders of magnitude" greater efficiency. As a general rule the term is used to mean factors of 10. Even a fairly trashy internal combustion engine would reach 100% in far less than one order of magnitude improvement, even without exploiting waste heat. I am all in favour of improving fuel efficiency, and FCs seem particularly good options in theory, but let's keep things in perspective, hm?
Cheers,
Jon
 
  • #24
if the exhaust were "conditioned" it would be very easy to separate the water and co2, and then the CO2 could be captured, compressed and stored. Later on the CO2 could be used for a multitude of things, or if cap and trade happens, could be used as a "currency" of carbon tax. My real concern, is as with any idea that seems too good to be true, and is all in the control of a few individuals, how stable is the long term costs.
If its construction was public knowledge, competition eventually drives costs down, but in monopoly situations, any savings can potentially vaporize if the rental costs are un controlled.

I am pleasently optimistic, but have seen the fuel cell idea go around for darn'd near 20 years and still don't see them used much, and their costs have remained high

dr
 
  • #25
dr dodge said:
if the exhaust were "conditioned" it would be very easy to separate the water and co2, and then the CO2 could be captured, compressed and stored.
You are referring to a combustion engine?
I am pleasently optimistic, but have seen the fuel cell idea go around for darn'd near 20 years ...
Coming up on http://en.wikipedia.org/wiki/Fuel_cell#History".
 
Last edited by a moderator:
  • #26
mheslep said:
You are referring to a combustion engine?

I believe he is referring to a fuel cell as CO2 sequestration from an ICE is much more difficult than something like a SOFC.
Coming up on 200 years.

The ICE engine was invented about 203 years ago and is still rather inefficient by today's standards.
 
  • #27
I was indeed talking about the fuel cell. It would be real nice to hook up a box to the nat. gas line and get power for pennies on the dollar, and use the CO2 to keep the keg from going flat,but...

it just ain't happenin'...

my 20 years was in reference to the fuel cell being the solution for 20 years that just has not produced the results that were promised.

I thought I read that Calif metro was dumping most of the H2 buses because they didn't live up to the expected results

dr
 
  • #28
Topher925 said:
I believe he is referring to a fuel cell as CO2 sequestration from an ICE is much more difficult than something like a SOFC.

dr dodge said:
I was indeed talking about the fuel cell.
Edit: PEM fuel cells don't emit CO2. They emit H20. If a reformer is used in addition to the fuel cell, for methane fuels as in the Bloom Box, then either CO or CO2 will be produced.
http://www.fz-juelich.de/ief/ief-3/fuel_cells/gas_production/natural_gas_reforming/
 
Last edited by a moderator:
  • #29
wouldn't the fuel cell produce both water and CO2 if it was run on natural gas?
thats the only way (in my opinion) that it will work on a large scale

it costs too much, and makes way more pollution to make hydrogen from the natural gas
then an added infra structure is also needed

dr
 
  • #30
dr dodge said:
wouldn't the fuel cell produce both water and CO2 if it was run on natural gas?

That is correct. You can reform NG to decarbonize the fuel but it makes absolutely no sense to do so. Normally, you would just pipe the NG directly into the SOFC. If for what ever reason you do produce CO, you would just re-feed it back to the cathode since CO can be used as a fuel as well.

The products from a NG fueled SOFC will be H2O and CO2 and nothing else (well, nothing in measurable quantities).
 
  • #31
Ah, Topher's ~right. I was focused on hydrogen fueled http://en.wikipedia.org/wiki/Proton_exchange_membrane_fuel_cell" fuel cells in which the reformer, if used, is a separate system. SOFC's like Bloom's directly process light hydrocarbons because the anode has two roles: i) oxidization of hydrogen using oxygen ions diffusing through the stack, and also ii) catalytic reforming of light hydrocarbons into hydrogen, i.e. a catalytic reformer is intrinsic to an SOFC.
 
Last edited by a moderator:
  • #32


mheslep said:
In one includes the reformer, I believe that's high by 10-15%.

In this interview with the inventor, K.R. Sridhar, he says there is no need for a reformer in his fuel cell. He does a crystal clear job of answering many of the issues brought up here. It can apparently also run on pure hydrogen. The interview is on youtube at the following address:

youtube.com/watch?v=uVZAT3U_Jls&feature=player_embedded
 
Last edited:
  • #33


robert_13 said:
In this interview with the inventor, K.R. Sridhar, he says there is no need for a reformer in his fuel cell. He does a crystal clear job of answering many of the issues brought up here. It can apparently also run on pure hydrogen. The interview is on youtube at the following address:

youtube.com/watch?v=uVZAT3U_Jls&feature=player_embedded
I've seen it. Sridhar says there is no need for an *external* reformer. When the fuel is methane, he states that internal to the device "methane and water react" to form syngas, which is called methane reforming.
 

FAQ: The Bloom Box: Could it Power Our Homes? | CBS 60 Minutes Report

What is the Bloom Box?

The Bloom Box is a type of fuel cell technology that converts natural gas or other fuels into electricity through a chemical reaction. It was developed by a company called Bloom Energy and has been marketed as a potential source of clean and efficient energy for homes and businesses.

How does the Bloom Box work?

The Bloom Box uses a process called solid oxide fuel cell technology, which involves the use of a ceramic material to convert fuel into electricity. The fuel, such as natural gas, is fed into the cell and combined with oxygen, creating a chemical reaction that produces electricity. The process is similar to how a battery works, but instead of storing energy, the Bloom Box creates it continuously as long as fuel is supplied.

Can the Bloom Box power our homes?

The Bloom Box has the potential to power homes, but it is not currently being used on a large scale for residential purposes. It has been primarily marketed to businesses and organizations as a way to reduce energy costs and carbon emissions. However, the technology is still in its early stages and would require significant investment and infrastructure to be used in homes.

Is the Bloom Box a clean energy source?

The Bloom Box has been marketed as a clean energy source because it does not produce emissions during the electricity generation process. However, the fuel used, such as natural gas, is still a fossil fuel and produces carbon emissions during its extraction and transportation. Additionally, the production of the Bloom Box itself has a carbon footprint, so it is not completely emissions-free.

What are the potential drawbacks of the Bloom Box?

One potential drawback of the Bloom Box is its cost. It is still an expensive technology, and the initial investment may not be feasible for many homeowners. Additionally, the fuel used to power the Bloom Box is not renewable, so it is not a sustainable long-term solution. There are also concerns about the disposal of the Bloom Box, as it contains toxic materials that could harm the environment if not properly handled.

Back
Top