- #1
jeebs
- 325
- 4
I've got this problem where I've got a molten polymer (polyisoprene) in a region where I can imagine a cubic lattice. I am told that it has a density of 910 kg/m^3 and an entanglement molecular weight of 3.7 kg/mol.
earlier in the problem I have to figure out the molecular weight of an isoprene monomer, which is 68 (relative molecular mass) or 1.14x10^-25kg (normal mass). Also, I had to imagine each monomer sitting on a cubic lattice point, and calculate the lattice spacing. Using the density and the monomer mass, and taking a 1m x 1m x 1m volume of this molten stuff, I worked out the total number of monomers within this volume. I then cube-rooted that to find out the number of monomers stretching along one side of this imaginary cube of side length 1m, and divided 1m by this number to get the distance spanned by 1 monomer, which is the lattice spacing.
Now onto where I get stuck. I need to find the number of these cubic lattice points that would be found within the tube corresponding to one molten polyisoprene chain of mass 74kg/mol.
So, I've started by saying that this molecule will have a mass of 74kg / 6.02x10^23 = 1.23x10^-22 kg, because I know the mass of 1 mole of this molecule, so I divided by the avogadro number to get the mass of the chain.
Using the mass per monomer, I found that the chain has N = 1.23x10^-22 kg / 1.14x10^-25 kg = 1078 monomers in it.
Also, apparently molten polymer chains have a "random walk" shape, where the average end to end distance is given by L = a(N^0.5) where a is the length of the monomer or the lattice spacing.
I'm really not sure where to go from here though, because I need to work out the volume that this chain occupies. I could then use the number density of cubic lattice points since I know their separation and I would have my answer. Finding the tube volume is proving difficult though.
Has anyone got any suggestions?
Could it be a valid suggestion to assume the tube has a circular cross-sectional diameter equal to the monomer length? If so, that would solve this problem...
Thanks.
earlier in the problem I have to figure out the molecular weight of an isoprene monomer, which is 68 (relative molecular mass) or 1.14x10^-25kg (normal mass). Also, I had to imagine each monomer sitting on a cubic lattice point, and calculate the lattice spacing. Using the density and the monomer mass, and taking a 1m x 1m x 1m volume of this molten stuff, I worked out the total number of monomers within this volume. I then cube-rooted that to find out the number of monomers stretching along one side of this imaginary cube of side length 1m, and divided 1m by this number to get the distance spanned by 1 monomer, which is the lattice spacing.
Now onto where I get stuck. I need to find the number of these cubic lattice points that would be found within the tube corresponding to one molten polyisoprene chain of mass 74kg/mol.
So, I've started by saying that this molecule will have a mass of 74kg / 6.02x10^23 = 1.23x10^-22 kg, because I know the mass of 1 mole of this molecule, so I divided by the avogadro number to get the mass of the chain.
Using the mass per monomer, I found that the chain has N = 1.23x10^-22 kg / 1.14x10^-25 kg = 1078 monomers in it.
Also, apparently molten polymer chains have a "random walk" shape, where the average end to end distance is given by L = a(N^0.5) where a is the length of the monomer or the lattice spacing.
I'm really not sure where to go from here though, because I need to work out the volume that this chain occupies. I could then use the number density of cubic lattice points since I know their separation and I would have my answer. Finding the tube volume is proving difficult though.
Has anyone got any suggestions?
Could it be a valid suggestion to assume the tube has a circular cross-sectional diameter equal to the monomer length? If so, that would solve this problem...
Thanks.
Last edited: