Comparing K and k in Hecht's Optics Book

  • Thread starter manimaran1605
  • Start date
  • Tags
    Book Optics
In summary: For example, on the previous page, equation (2.21) is a wave equation with a propagation number, while equation (2.24) is a wave equation with a wave number. They're both valid equations, and they both represent the same wave phenomenon.
  • #1
manimaran1605
60
0
What is the difference between propagation number(K) and wave number(k) described in Optics book written by hecht

He defined K=2π/λ and k=1/λ and both of them have the same units (i.e, meter inverse)
What does wave number of a Harmonic function tells about?
 
Physics news on Phys.org
  • #2
The units look the same, but they aren't quite the same. It's a somewhat confusing notation in my opinion (especially when you use 'K' and 'k'!)

K=2π/λ is in units of radians/m and k=1/λ has units cycles/m, where "radians" and "cycles" are usually omitted. You just have to remember which kind of units you're using, so you know whether there needs to be a factor of 2π inside the sine/cosine/exponential.

For example, a wave of "propagation number(K)" would be sin(Kx), while a wave with "wave number(k)" would be sin(2πkx).
 
  • Like
Likes 1 person
  • #3
manimaran1605 said:
[Hecht] defined [propagation number] K=2π/λ and [wave number] k=1/λ

You have it backwards. He defines the propagation number as ##k = 2 \pi / \lambda## (lower-case Latin letter "k") and the wave number as ##\kappa = 1 / \lambda## (lower-case Greek letter "kappa", not upper-case Latin letter "K"). Those different symbols (##k##, ##\kappa##, and ##K## in LaTeX; or k, κ, and K in PF's default font) tend to confuse people. Look carefully! :smile:

As olivermsun noted, the units are different. ##k## is much more commonly used. ##\kappa## is mainly used by spectroscopists. I don't know if they have a practical reason for it, or if it's just a historical convention.
 
Last edited:
  • Like
Likes 1 person
  • #4
The ##k = 2 \pi / \lambda## version is often convenient for working with waves when you also use the angular frequency ##\omega = 2 \pi / T## (where ##T## is the wave period).

That way, you can write things like ##e^{i(kx - \omega t)}## without having ##2\pi##s all over the place. :smile:
 
  • #5
olivermsun said:
That way, you can write things like ##e^{i(kx - \omega t)}## without having ##2\pi##s all over the place. :smile:

Exactly. The OP (manimaran1605) should compare equation (2.24) in Hecht with the other equations in that group on page 16, which are different ways of writing the same wave equation using different combinations of constants.
 

1. What is the difference between K and k in Hecht's Optics Book?

K and k are both constants used in Hecht's Optics Book, but they represent different quantities. K is the dielectric constant, which describes how a material affects the electric field in the presence of an electromagnetic wave. On the other hand, k is the extinction coefficient, which measures the absorption of light by a material.

2. How are K and k related in Hecht's Optics Book?

In Hecht's Optics Book, K and k are related by the equation K = n + ik, where n is the refractive index and i is the imaginary unit. This equation is known as the complex refractive index and is used to describe the behavior of light in a material with both absorption and refraction.

3. Why are K and k important in optics?

K and k are important in optics because they provide information about how light interacts with different materials. By knowing the values of K and k for a material, we can predict how the material will affect the propagation of light through it. This is crucial in designing and understanding optical devices and systems.

4. How are K and k measured in Hecht's Optics Book?

K and k are typically measured experimentally using techniques such as spectroscopy or ellipsometry. These methods involve shining light of different wavelengths or angles onto a material and measuring the reflected or transmitted light to determine the values of K and k. Alternatively, they can also be calculated using theoretical models and equations.

5. Can K and k change for a material in Hecht's Optics Book?

Yes, the values of K and k can change for a material depending on various factors such as temperature, pressure, or the frequency of light. In general, the dielectric constant K is more sensitive to changes in temperature and pressure, while the extinction coefficient k is more affected by the frequency of light. These changes in K and k are important to consider when studying the optical properties of materials under different conditions.

Similar threads

  • Advanced Physics Homework Help
Replies
2
Views
1K
Replies
1
Views
30K
  • Other Physics Topics
Replies
1
Views
1K
  • Classical Physics
Replies
2
Views
946
Replies
17
Views
1K
  • Other Physics Topics
Replies
5
Views
2K
  • Introductory Physics Homework Help
Replies
1
Views
889
  • Other Physics Topics
Replies
1
Views
3K
  • Introductory Physics Homework Help
Replies
5
Views
8K
  • Introductory Physics Homework Help
Replies
6
Views
1K
Back
Top