- #1
Skaperen
- 83
- 0
I am looking for a step-up isolation transformer (not an autotransformer) with an input of 120V and an output of 240V where the ground reference for the secondary is half way between the two hot line outputs so each is 120V relative to ground with opposing phase angles so they are 240V relative to each other. If you don't know how a 240V circuit is configured in USA, then you would not understand this need.
Ideally this would be a small unit, under 200 watts, with a normal USA grounded plug (NEMA 5-15P) with at least some usable output receptacle (NEMA 6-15R preferred but others that work are NEMA 14-15R, IEC 60320 C13, or Schuko).
Ideally this would be a small unit, under 200 watts, with a normal USA grounded plug (NEMA 5-15P) with at least some usable output receptacle (NEMA 6-15R preferred but others that work are NEMA 14-15R, IEC 60320 C13, or Schuko).