Can an Air Compressor Run on 12v and Deliver 150psi Continuously?

In summary, an air compressor can run on 12v and deliver 150psi continuously. This is made possible by using a high-powered motor and a pressure regulator to maintain a consistent pressure output. However, it is important to note that the efficiency and performance of the compressor may be affected by the power source and it is recommended to use a high-quality battery or power supply for optimal results.
  • #1
Siameto
Is there an air compressor that can run on 12v continously delivering 150psi?
 
Engineering news on Phys.org
  • #2
The $20 tyre pump in my car boot has exactly those specs. Any auto shop or hardware store will stock them.
Of course you haven't specified the other key parameter: the flow rate. Mine is 9 lpm, so good for pumping up a flat tyre or a soccer ball but not much else.
 
  • Like
Likes russ_watters

1. What is an air compressor?

An air compressor is a device that converts power, typically from an electric motor or diesel engine, into potential energy stored in compressed air. This compressed air can then be used for a variety of purposes, such as powering tools or machinery, filling tires, or providing ventilation.

2. How does an air compressor work?

An air compressor works by drawing in air from the surrounding environment and compressing it using a piston, rotary screw, or centrifugal force. This compressed air is then stored in a tank or released directly for immediate use. The process is repeated as needed to maintain the desired pressure.

3. What are the different types of air compressors?

There are three main types of air compressors: reciprocating, rotary screw, and centrifugal. Reciprocating compressors use a piston to compress air, while rotary screw compressors use two rotating screws. Centrifugal compressors use a spinning impeller to increase air pressure.

4. What are the common uses for air compressors?

Air compressors have a wide range of uses, including powering pneumatic tools, inflating tires and sports equipment, providing ventilation in confined spaces, and powering industrial machinery. They are also commonly used in construction, automotive repair, and manufacturing industries.

5. What factors should be considered when choosing an air compressor?

When choosing an air compressor, consider the required pressure and volume, the power source, the type of compressor (reciprocating, rotary screw, or centrifugal), the duty cycle, and the size and portability of the compressor. It is also important to consider the maintenance and operating costs, as well as the noise level of the compressor.

Similar threads

  • General Engineering
Replies
18
Views
2K
Replies
4
Views
4K
  • General Engineering
Replies
5
Views
5K
  • General Engineering
Replies
2
Views
1K
  • General Engineering
Replies
11
Views
2K
  • General Engineering
Replies
20
Views
6K
Replies
14
Views
2K
  • Mechanical Engineering
Replies
3
Views
2K
  • Aerospace Engineering
Replies
5
Views
573
  • General Engineering
Replies
3
Views
2K
Back
Top