Auto/Motor A DIY Wooden EV Rolls Royce for Kids

  • Thread starter Thread starter jedishrfu
  • Start date Start date
  • Tags Tags
    Diy Ev Kids
Messages
15,437
Reaction score
10,135
TL;DR Summary
DIY Wooden Rolls Royce for Kids
 
  • Like
  • Love
Likes hutchphd, phinds, berkeman and 6 others
Physics news on Phys.org
WOWZERS !
 
Three rabbits will be wintering in a 2m x 2m x 2m wooden hut. Outside temperature does not go below -30c (-22f) Planning to put a 50cm by 50cm 1mm thick stainless steel sheet on the floor of the hut (inside off course) My plan is to heat the sheet with a 50w PTC heater element https://fi.rsdelivers.com/product/dbk-enclosures/fg135600/dbk-enclosures-heating-element-75mm-50-w-100-240-v/dc/2995922?backToResults=1 Is this heater (50W) enough to keep the pad warm enough to sustain liquid...
Hey all. I'm looking to buy a zero-turn mower and I need to build/purchase a ramp to get it into my shed for storage. Exact model is this one. I need to figure out how long of a ramp I need to make sure the mower doesn't bottom out when driving up and down the ramp. Mower stats: Wheelbase: approximately 76 inches. Height: 4.5 inches (based off the highest setting on the deck height adjustment) Shed entrance is 12 inches off the ground. The manufacturer says that the mower can handle...
Thread 'How to remove a seized toilet tank bolt?'
greetings I replaced my bedroom toilet due to water leak and unable to replace water tank bolt with new ones. so now i have old toilet in the yard and i took a closer look at the seized bolt, it seems that the bottom part (a butterfly fastener) holds onto the bolt really tight, when i turned the head inside the tank with flathead screwdriver, the fastener moves with the bolt as the whole. is there a way to remove the bolt?
Back
Top