Adding extra socket share with water heater power supply

2 replies · 2K views · last reply
JJ1
Messages
2
Reaction score
0
It is safe to add on extra socket by this way?
Original connection:
postimg.org/image/v6nshoygh/
Add-on connection:
postimg.org/image/vkoccsyu5/

The extra socket is for light usage only. Water heater is instant water heater without tank. The switch is double pole single switch.
 
Please give me some advise.
 
Attachments
  • Wiring diagram: a circuit breaker box on the left with L and N lines running to a double pole, single switch, then L and N lines in red running to a water heater box on the right.
    Before.png
    1.9 KB · Views: 566
  • Wiring diagram: a circuit breaker with L and N lines feeds a switch box, which connects in red to a water heater labelled L and N, and in orange to a UK-style socket outlet labelled L and N.
    After.png
    4.3 KB · Views: 595
That drawing really doesn't tell us anything. If you have to ask, you shouldn't do it. If you have a reference book that explains something like this well and you completely understand it then go ahead and do it. My bet is that you will not. A circuit that feeds a tankless water heater will be too large to safely run a light circuit. In the USA we never interrupt the neutral so right off the bat you are wrong (if you are in the USA) with a double pole switch as I am assuming you will use one pole to switch the neutral and the other to switch the hot.
 
  • Like
Likes   Reactions: JJ1 and davenn