Calculate Voltage on Capacitor Over Time with RC Time Constant

AI Thread Summary
To calculate the voltage across a capacitor as a function of time, the Thevenin equivalent voltage should be determined at t=0 and t=∞, using the formula X(t)=X(0)+[X(0)-X(∞)]-t/τ, where τ=RThC. A capacitor acts as a short circuit for high frequencies (t=0) and an open circuit for DC (t=∞). For the AC source question, the frequency can be found from the sine function, and the voltage at t=0 is calculated as 100 * 20.5sin(π/3). The RMS current is determined using the impedance, resulting in IRMS=1A, and the complex expression for the current is derived from the voltage and impedance. The calculations provided appear to be correct based on the given parameters.
DIrtyPio
Messages
18
Reaction score
0
Hi, I have a simple question: if I have a circuit with a capacitor, how do I calculate the voltage on the capacitor in function of time, I mean I know that tau(τ)=RC and there is the general formula X(t)=X(0)+[X(0)-X(∞)]-t/τ. So here comes my question should I consider the capacitor as the load and calculate the Thevenin equivalent voltage at t=0 and t=∞ and use the X(t)=X(0)+[X(0)-X(∞)]-t/τ forumla ,where τ=RThC.
 
Physics news on Phys.org
You can do it that way. A simple "rule of thumb" is that a capacitor is a short for high frequencies (t=0) and an open for DC (t=infinity).
 
Ok, I have some circuits and I don't know if I resolved the problems right so here are they:
and I have another question: files
1. The voltage of an ideal a.c. source has the expression:
ug = 100 *20.5sin (2*104 ∏*t +∏/3) V.
1.1. Find the value of the frequency and the value of the voltage at the moment t=0
1.2. Find the complex expression and the rms value of the current if the source supplies the impedance consisting in the resistance of 80 Ω connected in series with the inductance of 3/∏ mH (0.955 mH).

I don't really know what does it mean at the question 1.1. The frequency at the moment t=0. The voltage is 100 *20.5sin (∏/3).
The second question(1.2) I've solved like this:
URMS=100V ; R=80Ω ; L=3mH => XL=j*2*104∏*3/∏*10-3=j*60Ω.
IRMS=URMS/|Z|, where |Z|=(802+602)1/2=100Ω => IRMS=100/100=1A.
And the complex expression of the current is Ucomplex/Rcomplex=100j∏/3/j60=100(cos∏/3+jsin∏/3)/j60=100(1/2+j31/2/2)/j60=50+j50*(31/2)/j60.

Is this correct?
 

Attachments

  • 20052009092.jpg
    20052009092.jpg
    18.5 KB · Views: 336
  • 20052009094.jpg
    20052009094.jpg
    19.3 KB · Views: 336
Last edited:
Thread 'Question about pressure of a liquid'
I am looking at pressure in liquids and I am testing my idea. The vertical tube is 100m, the contraption is filled with water. The vertical tube is very thin(maybe 1mm^2 cross section). The area of the base is ~100m^2. Will he top half be launched in the air if suddenly it cracked?- assuming its light enough. I want to test my idea that if I had a thin long ruber tube that I lifted up, then the pressure at "red lines" will be high and that the $force = pressure * area$ would be massive...
Back
Top