Calculating Apparent Power, Average Power, and Power Factor in AC Circuits

AI Thread Summary
To calculate apparent power (S), average power (P), and power factor (PF) in AC circuits, one must first determine the circuit's impedance, which includes both inductive and capacitive components. The formulas for S and P are S = 1/2 Vm Im and P = 1/2 Vm I am Cos(φ), respectively. The correct results for the example provided are 676 VA at an angle of 58.16 degrees, with a power factor of 52% and an average power of 357 watts. It's essential to show previous attempts to identify errors in calculations. Accurate calculations require a clear understanding of the circuit parameters and their relationships.
mohamen
Messages
8
Reaction score
0
ac impedance ...find power

this is the circuit...attached...i have to find appartent power ( S) , Average Power (P) and power factor (p)...i have tried this question a lot times but every time i get incorrect result ...please solve this question...

Thanks
 

Attachments

Engineering news on Phys.org
please reply...
 
Please show us what you have tried.

What are the definitions of the quantities you need to find?
 
u just have 2 find the apparent power and average power ...u have been given a circuit having L & C...first u have to find its impedances then find the S and P...the formula for S is S=1/2 Vm Im...and for P=1/2 Vm I am Cos (phi)...thats it...i have tried by this but i didnt get the correct answer...
 
You need to show us what you have tried, that way we can help you find your errors.
 
Your naswers should be 676VA at an angle of 58.16 degrees. PF=52%, Power = 357 watts. Now, what have you done so far?

Hope this helps.
 
Thread 'Weird near-field phenomenon I get in my EM simulation'

Thread 'Weird near-field phenomenon I get in my EM simulation'

I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
View full post »

Thread 'EMF (Electromagnetic Field) & EHS (Electromagnetic Hyper Sensitivity)'

Hello dear reader, a brief introduction: Some 4 years ago someone started developing health related issues, apparently due to exposure to RF & ELF related frequencies and/or fields (Magnetic). This is currently becoming known as EHS. (Electromagnetic hypersensitivity is a claimed sensitivity to electromagnetic fields, to which adverse symptoms are attributed.) She experiences a deep burning sensation throughout her entire body, leaving her in pain and exhausted after a pulse has occurred...
View full post »

Similar threads

Reducing AC inrush current in this setup
Replies
15
Views
2K
Power factor of a retrofitted LED unit in a fluorescent fitting
Replies
8
Views
2K
Maximum power from a transformer
Replies
8
Views
3K
AC Drift Velocity: Understand Reactive Power & Movement of Electrons
Replies
11
Views
2K
Sizing an Isolation Transformer for a DC Power Supply
Replies
8
Views
2K
Alternator torque when connected to a phase-shifted AC source
Replies
3
Views
2K
How transmission lines deliver (established?) power from generator
Replies
8
Views
2K
Could you use Solar to power a DC to AC Inverter? (Description below)
Replies
6
Views
3K
Query about the time average of an AC power supply
Replies
2
Views
2K
Resistive heating power AC vs rectified AC/DC
Replies
10
Views
4K

Hot Threads

Recent Insights

Back
Top