Calculating Average Velocity for a Multi-Segment Trip

AI Thread Summary
To calculate the average velocity for a multi-segment trip, it is essential to determine the total distance traveled and the total time taken, rather than averaging the speeds of each segment. The car travels a total distance of 84.9 miles, and the total time calculated for the trip is approximately 2.08 hours. The average velocity is then found by dividing the total distance by the total time, resulting in an average velocity of about 40.85 mi/h. It is emphasized that taking an average of averages is incorrect, as different segments may have varying times that significantly influence the overall average. Accurate calculations require careful consideration of the time spent at each speed.
Beanie
Messages
32
Reaction score
0

Homework Statement


A car travels along a straight stretch of road. It proceeds for 11 mi at 52 mi/h, then 25.4 mi at 43 mi/h, and finally 48.5 mi at 38 mi/h.

What is the car’s average velocity during the entire trip?

Answer in units of mi/h.

Homework Equations

The Attempt at a Solution



Average Velocity= (V1+V2)/2

Average Velocity= (52+43+38)/3

Average Velocity= 133/3

Average Velocity= 44.3333 mi/h

I tried calculating average velocity by adding up all of the velocities given and dividing them by the amount of velocities given. However this answer was incorrect.

What am I doing wrong?
Is there a different way of calculating average velocity?
 
Physics news on Phys.org
If I go 1 mile at 10 miles/hr and then go 1000 miles at 1 mile/hr, the average velocity would obviously be very close to 1, where the majority of your time is spent. Using your method, it would be (11+1)/2 = 5.5, clearly wrong. Taking the average only works when the times taken are the same.

Note that ## v_{avg} = \frac{\Delta x}{\Delta t} ##. So calculate the total distance travelled, then calculate the total time, and divide.
 
Remember this commandment: do not take an average of averages.
A speed over some interval, whether it's a steady speed or not, is a kind of average.
The problem is that if some intervals are longer than others they need to be given greater weight, since they affect the overall time more.

The correct way is to find the total distance and total time.
 
minimario said:
If I go 1 mile at 10 miles/hr and then go 1000 miles at 1 mile/hr, the average velocity would obviously be very close to 1, where the majority of your time is spent. Using your method, it would be (11+1)/2 = 5.5, clearly wrong. Taking the average only works when the times taken are the same.

Note that ## v_{avg} = \frac{\Delta x}{\Delta t} ##. So calculate the total distance travelled, then calculate the total time, and divide.

So...

Total distance= 84.9 mi
Total time= 2.07855 h ?
Average velocity= 40.84574 mi/h?
 
haruspex said:
Remember this commandment: do not take an average of averages.
A speed over some interval, whether it's a steady speed or not, is a kind of average.
The problem is that if some intervals are longer than others they need to be given greater weight, since they affect the overall time more.

The correct way is to find the total distance and total time.

So...

Total distance= 84.9 mi
Total time= 2.07855 h ?
Average velocity= 40.84574 mi/h?
 
Exactly :)
 
Beanie said:
So...

Total distance= 84.9 mi
Total time= 2.07855 h ?
Average velocity= 40.84574 mi/h?
Looks right.
 
haruspex said:
Looks right.

Thank you for the help!
 
minimario said:
Exactly :)

Thanks!
 
  • #10
how did you get the total time?
 
  • #11
HermioneGranger said:
how did you get the total time?
@HermioneGranger ,

Can you find the time for each segment of the trip ?
 
Back
Top