Can a wireless charger eliminate the hassle of tangled cords?

AI Thread Summary
Wireless chargers are being discussed as a potential solution to the problem of tangled cords. A post in another forum provides a detailed explanation of designing a wireless battery charger, outlining the technical aspects involved. This information may be beneficial for those interested in the mechanics of wireless power transfer. The link shared offers insights that could help users understand the advantages of wireless charging technology. Overall, wireless chargers could simplify charging processes and reduce cord clutter.
ranger
Gold Member
Messages
1,685
Reaction score
2
There have been a few posts about wireless power transfer here on PF, so some of you may find this useful.
I came across this post in another forum about designing a wireless battery charger. The author gives a rather through description of what's going on and why he's doing certain things.

http://www.discovercircuits.com/forum/showflat.php?Cat=0&Number=6040&an=0&page=0#Post6040
 
Engineering news on Phys.org
awesome. Just the kind of thing I was looking for. thanks for the link.

-Mark
 

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »

Thread 'Question about bonding ground and neutral'

I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
View full post »

Similar threads

Op-amp compensation of cascade fudges audio signal oddly
Replies
3
Views
2K
Hydrogen-Boron Plasma Toroid Fusion
Replies
4
Views
7K
Hydrogen-boron High Density Plasma Toroid Fusion
Replies
3
Views
3K

Hot Threads

Recent Insights

Back
Top