Can I store a neodymium magnet in a freezer?

  • Thread starter Thread starter rohit dutta
  • Start date Start date
  • Tags Tags
    Magnet Neodymium
AI Thread Summary
Neodymium magnets can be stored in a freezer without risk of losing magnetization, as their Curie temperature is significantly higher than typical ambient temperatures. Concerns about magnet strength loss are largely unfounded, as these magnets remain stable at room temperature and even in a freezer. The Curie temperature varies based on the specific formulation of the magnet, with higher strength magnets generally having lower Curie points. However, exposing magnets to rapid temperature changes can cause brittle magnets to shatter. Overall, storing neodymium magnets in a freezer offers no significant advantage.
rohit dutta
Messages
19
Reaction score
0
Well, permanent magnets are made of ferromagnetic material. These magnets lose permanent magnetization above the Curie temperature(on heating) and behave as paramagnetic materials. The reason is thermal energy. The magnetic moments lose their initial configuration and no longer remain aligned with each other. This reduces it's overall strength.

Can I place my magnets in a freezer to ensure no loss in magnetization?
 
Physics news on Phys.org
It's not clear why you are concerned about loss of magnetization. The Curie Point, the temperature at which magnetization of a substance is lost, is well over 900 C for Nd magnets and 1000 C for iron magnets. As long as you aren't wandering around on the surface of Venus or Mercury, your magnets should be good to go at room temp.
 
Nd magnets in freezer

Yes, you can store them in a freezer. This will be no different from storing them at room temperature with respect to their losing their magnetic strength over time.

Nd:Fe:B magnets have different Curie temperatures depending on their specific formulation. The ones with the highest field strength tend to have lower Curie temperatures. If you're building systems that incorporate rare Earth magnets (at least the Nd based magnets I'm familiar with), you should ensure they don't get above 100°C for short periods (think a few minutes). A good engineering design rule is to limit them to 80°C.

Storing them in a freezer, or anywhere below normal ambient temperature, will have no benefit and probably isn't worth the effort.
 
Magnets that are brittle may shatter when subjected to rapid temperature changes.
 
This is from Griffiths' Electrodynamics, 3rd edition, page 352. I am trying to calculate the divergence of the Maxwell stress tensor. The tensor is given as ##T_{ij} =\epsilon_0 (E_iE_j-\frac 1 2 \delta_{ij} E^2)+\frac 1 {\mu_0}(B_iB_j-\frac 1 2 \delta_{ij} B^2)##. To make things easier, I just want to focus on the part with the electrical field, i.e. I want to find the divergence of ##E_{ij}=E_iE_j-\frac 1 2 \delta_{ij}E^2##. In matrix form, this tensor should look like this...
Thread 'Applying the Gauss (1835) formula for force between 2 parallel DC currents'
Please can anyone either:- (1) point me to a derivation of the perpendicular force (Fy) between two very long parallel wires carrying steady currents utilising the formula of Gauss for the force F along the line r between 2 charges? Or alternatively (2) point out where I have gone wrong in my method? I am having problems with calculating the direction and magnitude of the force as expected from modern (Biot-Savart-Maxwell-Lorentz) formula. Here is my method and results so far:- This...
Back
Top