Is a Ring Crimp Terminal the Best Connection Tip for TCK Type K?

  • Thread starter Thread starter AligatorAmy
  • Start date Start date
  • Tags Tags
    Connection Type
AI Thread Summary
Using a ring crimp terminal is a suitable option for connecting a TCK type K thermocouple to a brass component at high temperatures, such as 200°C. Brass-made rings are recommended for durability and compatibility. Omega's assemblies utilize similar connections, indicating industry acceptance of this method. Overall, the ring crimp terminal provides a reliable and effective connection for thermocouples in high-temperature applications. This approach should meet the user's needs effectively.
AligatorAmy
Messages
27
Reaction score
1
Hi,

I need to connect my TCK type K to the brass component which has working temperature approximately 200degC.
I intend to drill/tap a hole in the brass (M3) and fix TCK to it with a bolt.

I wonder whether using ring crimp terminal as the tip for the termocouple would be a good option.
http://uk.rs-online.com/web/c/connectors/terminals-splices/crimp-ring-terminals/
If yes, I think it would be good to use brass made rings.

What do you think? Is the ring crimp terminal a right choice as the connection tip for TCK type K?

Please help.
Thank you.
Regards
 
Engineering news on Phys.org
That should work just fine. Omega does just that with some of their assemblies. See their http://www.omega.com/pptst/WT.html.

WT_l.jpg
 
  • Like
Likes berkeman and jim hardy
Thank you dlgoff.
 

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »

Thread 'Question about bonding ground and neutral'

I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
View full post »

Similar threads

BRS: PKI Cryptosystems for SA/Ms: A Tutorial
Replies
13
Views
3K

Hot Threads

Recent Insights

Back
Top