DC Bias on Capacitors: Will It Work?

2 replies · 1K views · last reply
Samson4
Messages
242
Reaction score
15
Will this circuit work for maintaining a dc bias on the capacitors? I am under the impression that there is +4 v at point A; even if an emf charges and discharges the capacitors. I worry that current will flow into the battery.
Circuit schematic with two capacitors on the left and right, each labelled +4v and -4v, connected to batteries, a central node A joined to a +4v battery above, and a lower loop containing an AC source symbol.
 
Samson4 said:
Will this circuit work for maintaining a dc bias on the capacitors? I am under the impression that there is +4 v at point A; even if an emf charges and discharges the capacitors. I worry that current will flow into the battery. View attachment 94242
It looks basically OK, but delete the "-4V" notes, since the outsides of the caps are connected to ground ("0V"),

The center tap will be biased at 4V, and the outsides of the windings at the caps will have 4Vdc plus an AC component from the transformer action.
 
  • Like
Likes   Reactions: Samson4
Thank you so very much sir. You've made my evening.
 
  • Like
Likes   Reactions: berkeman