Does a Styrofoam Ball Rise in a 30 ft Water-Filled Pipe?

  • Context: Undergrad 
  • Thread starter Thread starter alibaba2
  • Start date Start date
  • Tags Tags
    Rise
Click For Summary

Discussion Overview

The discussion centers around the behavior of a Styrofoam ball in a 30 ft water-filled pipe, specifically whether the ball will rise due to buoyancy or be suppressed by the water flow. Participants explore the effects of buoyancy, pressure differentials, and drag on the ball's movement within the flowing water.

Discussion Character

  • Exploratory
  • Technical explanation
  • Debate/contested

Main Points Raised

  • One participant suggests that the ball would rise due to the constant water level, implying no pressure differential exists because water is added and replaced at the same rate.
  • Another participant agrees that the ball would rise but notes that its speed would be affected by the downward flow of water, emphasizing the role of drag rather than static water pressure.
  • A different viewpoint indicates that the ball's rise speed is influenced by the orifice formed between the ball and the tube walls, suggesting that a tighter fit would slow its ascent.
  • One participant posits that if the drag force equals the buoyant force, the ball would not rise, indicating a balance of forces is critical to its movement.

Areas of Agreement / Disagreement

Participants generally agree that the ball will rise, but there is disagreement regarding the factors influencing its speed and the conditions under which it may not rise. The discussion remains unresolved regarding the exact dynamics at play.

Contextual Notes

Participants express uncertainty about the mathematical modeling of the situation, particularly concerning the effects of drag and the interaction between the ball's buoyancy and the water flow.

alibaba2
Messages
31
Reaction score
0
i have a 30 ft pipe - 10" diameter. there is a constant water flow at the top, keeping the water level constant ( the pipe is always full to the top). at the bottom the water just flows out of the basin and away. the pipe is is just 1" underwater in the pool underneath.
the yellow object is a styrofoam ball - diameter 9" so it will easily fit into the pipe.
will the ball rise up due to buoyancy and density differencial, or will the pressure from the water column above supress these forces and keep it at the bottom.
if the ball does rise, will its speed be slowed by the downward flow of water around it?
what will its estimate spped be, compared to the clasiccla setup where an object is released in a static water column, closed at the bottom .

thanks
 

Attachments

  • water.jpg
    water.jpg
    10.4 KB · Views: 558
Physics news on Phys.org
I could be wrong, but:

I believe the ball would rise. The water level in the pipe is always the same, so it is as though the ball were placed in a water-filled pipe with a bottom. Therefore there is not a pressure differential because water is added and replaced at the same rate. If the ball were placed at the top of the pipe it would not be sucked downward either.

As to the velocity of its rise compared to a static column: I believe based on the above that it would be equivalent.

Great question, BTW.
 
Last edited:
thanks for the reply.
anybody else?
 
I believe the ball would rise and its speed would be slowed by the water moving past it, but this is a very difficult question to answer mathematically. It isn't an issue of static water pressure, it is an issue of drag.
 
in experimenting with something like this a while back (mine was ping pong balls in tubes)

the ball will try to rise at some relatively slow speed, based on the buoyancy of the ball and the orifice formed between the ball and the side walls of the tube. the tighter the size of the ball to the tube the slower it will rise.

now given that rise speed (which will be constant regardless of water column above it) if the water is flowing down the tube faster than that rise speed, the ball will travel down, if the water is flowing slower than that speed, the ball will rise. if the two speeds match the ball will hold its relative position in the tube.

:) hope this helps
 
I agree with Russ, it's a matter of drag. I imagine that if the drag force was equal to the buoyant force it would not rise. On the other hand if the drag force wasn't large enough it would rise. Dunno for sure...

CS
 

Similar threads

  • · Replies 1 ·
Replies
1
Views
2K
  • · Replies 4 ·
Replies
4
Views
2K
  • · Replies 9 ·
Replies
9
Views
2K
  • · Replies 8 ·
Replies
8
Views
3K
  • · Replies 11 ·
Replies
11
Views
4K
  • · Replies 20 ·
Replies
20
Views
3K
  • · Replies 4 ·
Replies
4
Views
4K
Replies
4
Views
2K
  • · Replies 8 ·
Replies
8
Views
4K
Replies
5
Views
2K