Finding Current in Resistors & Charge of Capacitor

AI Thread Summary
The discussion revolves around calculating the current in resistors and the charge of a capacitor in a circuit after a switch has been closed for a long time. The current through a 3kΩ resistor is zero, leading to the conclusion that the other two resistors are in series, resulting in an equivalent resistance of 27kΩ and a current of 333mA. The voltage across the capacitor was initially misunderstood, but it was clarified that it is equal to the voltage across the 15kΩ resistor. The correct charge on the capacitor was determined using the formula Q=CV after finding the correct voltage. Ultimately, the participant successfully calculated the voltage and charge with assistance from others in the discussion.
ananonanunes
Messages
19
Reaction score
6
Homework Statement
_
Relevant Equations
_
Suppose the switch has been closed for a long time so that the capacitor is fully charged and current is constant.
a)Find the current in each resistor and charge Q of the capacitor.
b)The switch is now opened at t=0s. Write the equation for the current for the resistor of 15kΩ as a function of time and find the time interval needed for the charge to drop to 1/5 of its original value.
1682093015932.png

I was able to find the current in the resistors. I assumed the current would be 0A in the resistor of ##3k\Omega## and since there is no current in this "branch", the other two resistors are in series so ##I_{R_1}=I_{R_2}## and ##R_{eq}=12+15=27k \Omega##. ##I=\frac{\mathcal{E}}{R_{eq}}=333mA##.
I don't know how to find the charge in the capacitor. I thought that, because it was fully charged, ##Q=C\mathcal{E}## but that is not the correct answer.
 
Physics news on Phys.org
##Q=CV.##
What do you think the voltage across the capacitor is? Hint: There is no current through the 3 kΩ resistor.
 
kuruman said:
##Q=CV.##
What do you think the voltage across the capacitor is? Hint: There is no current through the 3 kΩ resistor.
Since there is no current through the ##3k\Omega## there is also no voltage across that resitor. So I thought the voltage across the capacitor would be the same as the electromotive force, because the voltage wouldn't need to be "split" between the capacitor and the resistor. But this is incorrect and I don't really understand why.
 
ananonanunes said:
Since there is no current through the ##3k\Omega## there is also no voltage across that resitor. So I thought the voltage across the capacitor would be the same as the electromotive force, because the voltage wouldn't need to be "split" between the capacitor and the resistor. But this is incorrect and I don't really understand why.
Look at the circuit again. The voltage across the capacitor is the same as the voltage across the 15kΩ resistor. What is that voltage?
 
  • Like
Likes ananonanunes
kuruman said:
Look at the circuit again. The voltage across the capacitor is the same as the voltage across the 15kΩ resistor. What is that voltage?
I just calculated the voltage and the charge using that voltage and I got the correct result. Thank you so much for the help!
 
  • Like
Likes berkeman and kuruman
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top