G - Can Macroscopic Vibration Create Sensations of Heat on a Planar Surface?

  • Thread starter Thread starter Islam Hassan
  • Start date Start date
  • Tags Tags
    Heat Macroscopic
AI Thread Summary
If a small object with a planar surface is vibrated at atomic-level frequencies, it will disintegrate rather than produce heat that can be sensed. The vibrations at such a high frequency are not sustainable for macroscopic objects, leading to structural failure. Touching the surface under these conditions would not yield any heat sensation. The discussion emphasizes that replicating atomic vibrations on a larger scale is not feasible. Consequently, no heat would be felt from such a scenario.
Islam Hassan
Messages
237
Reaction score
5
Suppose we have a small object with a planar surface and we can make that object/surface vibrate at an amplitude and frequency representative of the 'wriggling' of atoms/molecules at the atomic level. Will we feel heat if we then touch the planar surface? Can heat be sensed from a macroscopic 'replication' of normal, microscopic heat?IH
 
Science news on Phys.org
No. If you wiggle the object at a rate comparable to the vibrations at the atomic scale, the entire thing will disintegrate. As will your device that does the wiggling.
 
  • Like
Likes Islam Hassan
Drakkith said:
No. If you wiggle the object at a rate comparable to the vibrations at the atomic scale, the entire thing will disintegrate. As will your device that does the wiggling.
Thanx Drakkith, never suspected that...

IH
 
I need to calculate the amount of water condensed from a DX cooling coil per hour given the size of the expansion coil (the total condensing surface area), the incoming air temperature, the amount of air flow from the fan, the BTU capacity of the compressor and the incoming air humidity. There are lots of condenser calculators around but they all need the air flow and incoming and outgoing humidity and then give a total volume of condensed water but I need more than that. The size of the...
I was watching a Khan Academy video on entropy called: Reconciling thermodynamic and state definitions of entropy. So in the video it says: Let's say I have a container. And in that container, I have gas particles and they're bouncing around like gas particles tend to do, creating some pressure on the container of a certain volume. And let's say I have n particles. Now, each of these particles could be in x different states. Now, if each of them can be in x different states, how many total...
Thread 'Why work is PdV and not (P+dP)dV in an isothermal process?'
Let's say we have a cylinder of volume V1 with a frictionless movable piston and some gas trapped inside with pressure P1 and temperature T1. On top of the piston lay some small pebbles that add weight and essentially create the pressure P1. Also the system is inside a reservoir of water that keeps its temperature constant at T1. The system is in equilibrium at V1, P1, T1. Now let's say i put another very small pebble on top of the piston (0,00001kg) and after some seconds the system...
Back
Top