Help: Learning Probability of Detection and False Alarm

AI Thread Summary
The discussion centers on the need for deeper mathematical understanding of probability of detection (Pd) and false alarm in radar systems. While the book "Introduction to Radar Systems" by Skolnik provides basic concepts, it lacks detailed mathematical derivations. Recommendations for further reading include Steven Key's "Fundamentals of Statistical Signal Processing Volume II" and "Radar Calculations for the TI-59 Calculator" by Skillman, which outlines essential equations. Additionally, a MathCad sheet and an Excel spreadsheet have been developed to simplify Pd calculations across various scenarios. The conversation highlights the challenges in existing literature, particularly the lack of clarity in curves and definitions related to Pd computations.
chingkui
Messages
178
Reaction score
2
I am reading a radar book about probability of detection and false alarm. The book present the basic idea of the two concepts, but did not go deep into the details of mathematical derivations, which I would like to see. Can anyone suggest some books or online resources (not necessarily has to be radar related) that I could look up the mathematical theory behind? The book I am reading now is "Introduction to Radar Systems" by Skolnik. Thank you.
 
Engineering news on Phys.org
chingkui said:
I am reading a radar book about probability of detection and false alarm. The book present the basic idea of the two concepts, but did not go deep into the details of mathematical derivations, which I would like to see. Can anyone suggest some books or online resources (not necessarily has to be radar related) that I could look up the mathematical theory behind? The book I am reading now is "Introduction to Radar Systems" by Skolnik. Thank you.

I suggest Steven Key book Fundamentals of Statistical Signal Processing Volume II: detection theory.
 
I have had the same problem for many years when I worked for Northrop Grumman i.e. the radar book authors do not indicate how to compute the Pd. Skolnick and many others contain curves for isolated situations but specifically exclude the essential pd calculations for M of N detectors , and alert confirm waveforms and other situations that are important for computing the PD for actual radars. They spend a great deal of time on approximations that are usually not applicable in real cases and which are dangerous to use (as you get the wrong answer because of some obscure assumption that may not be correct). Usually the presented curves are hard to read as they have been either reproduced many times or have crazy scales that cannot be interpolated, or have terms that are undefined like false alarm number or radar peak power as opposed to average power, or the R0 number. Furthermore the authors like to impress you with terms like the Incomplete Toronto Function and Bessel Functions of order N etc, and incomplete Gamma functions.

I have developed a 50 page MathCad sheet that explains in detail how to compute the PD which includes the work of both Marcum and Swerling. I also developed a much much simplier excel spread sheet (with visual basic programs) that does the calculations for all the cases of Swerling 1,2,3,4 as well as the General Chi-Squared targets, Meyer and Meyer, Weinstock, Log Normal targets and PDI and m of N detectors. The spread sheet is very fast and surprizingly the computations are quite simple once you understand the general principles of 1) Target probability distribution functions, 2) probability distribution functions for a steady target in noise, 3) probability distribution functions for noise, 4) the probability distribution function for the sums of random numbers (convolution theorm) and the 5) the binomial theorem all of which can be obtained from the WikiPedia.
You can get a lot of information on how to perform the computations from a great book called "Radar Calculations for the TI-59 Calculator" by Skillman. Although he does the computations for an archaric device he has all the equations layed out. The only problem with the book is that the descriptions and writeups are succint and do not include all the details as his main objective was programming for the TI calculator. Matlab also has a library of functions for computing the PD but MatLab uses its own Non standard language (not C++)that is usually not worth learning. Furthermore, they are short on explanations for how to actually compute the PD as they are selling their own product and do not want to reveal how simple the computation actually is.

If you have further questions send me an email at AnnapolisStar@gmail.com
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
Thread 'Beauty of old electrical and measuring things, etc.'
Even as a kid, I saw beauty in old devices. That made me want to understand how they worked. I had lots of old things that I keep and now reviving. Old things need to work to see the beauty. Here's what I've done so far. Two views of the gadgets shelves and my small work space: Here's a close up look at the meters, gauges and other measuring things: This is what I think of as surface-mount electrical components and wiring. The components are very old and shows how...
Back
Top