How to control an angle of a catapult

AI Thread Summary
To achieve maximum distance with a catapult, the optimal launch angle is typically 45 degrees, assuming no air resistance. However, while 45 degrees maximizes range for a given initial velocity, it may not yield the highest initial velocity. Understanding the equations of projectile motion can help in determining the best angle for specific conditions. Initial velocity also plays a crucial role in maximizing distance. Overall, both angle and velocity must be considered for effective catapult design.
7elwa
Messages
2
Reaction score
0
hi everyone.. this is my first post
:smile:
im investigating a catapult
i would like to know how to control an angle of a catapult to get maximum distance ?


thanks ..
 
Last edited:
Physics news on Phys.org
I don't know if I'm answering this right:
1) Max distance can be achieved by setting the angle to 45 degrees (assuming no air friction on the projectile)

2) What do you mean a striking power?
 
kcirick said:
I don't know if I'm answering this right:
1) Max distance can be achieved by setting the angle to 45 degrees (assuming no air friction on the projectile)
45 degrees will give you the maximum range for a given initial velocity, but 45 degrees might not give the maximum initial velocity, so 45 degrees is not automatically going to give maximum range.
 
7elwa said:
hi everyone.. this is my first post
:smile:
im investigating a catapult
i would like to know how to control an angle of a catapult to get maximum distance ?

thanks ..

You may want to write down the equations of displacement for projectile motion, and try to express the angle of catapultation out of them somehow. See where it will get you. Also, you must assume the value of initial velocity.
 
thanx all for your replies ..
..
:smile: they were helpful..
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top