How to solve for Vout of this op amp

  • Thread starter Thread starter esob
  • Start date Start date
  • Tags Tags
    Amp Op amp
AI Thread Summary
To solve for Vout in a non-inverting op amp configuration, the absence of a feedback resistor from the non-inverting terminal to the output raises questions about the circuit's design. Participants noted that the question appears to be homework-related, suggesting the poster should utilize dedicated homework help forums for assistance. It was recommended to follow the Homework Help template for clarity and organization. The discussion concluded with the thread being closed, indicating no further responses would be provided. Proper channels for homework inquiries were emphasized.
esob
Messages
3
Reaction score
0
How would you solve for Vout? I get it is a non-inverting op amp but there is no resistor from the noninverting terminal to the output.
 

Attachments

  • IMG_4182.jpg
    IMG_4182.jpg
    29.9 KB · Views: 361
Engineering news on Phys.org
Is this homework?
 
gneill said:
Is this homework?
Yes
 
esob said:
Yes
Then please post your question in one of the homework help forums. Introductory Physics Homework or Engineering and Computer Science Homework forums would be appropriate.

Be sure to fill out the Homework Help template provided in the edit window.

This thread is closed.
 

Thread 'How might electronics be different if AC voltage was 72V at 45 Hz?'

Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
View full post »

Thread 'Why does the amperage go real high if there is a low voltage short?'

I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
View full post »
Thread 'Electromagnet magnetic field issue'

Thread 'Electromagnet magnetic field issue'

Hi Guys We are a bunch a mechanical engineers trying to build a simple electromagnet. Our design is based on a very similar magnet. However, our version is about 10 times less magnetic and we are wondering why. Our coil has exactly same length, same number of layers and turns. What is possibly wrong? PIN and bracket are made of iron and are in electrical contact, exactly like the reference design. Any help will be appreciated. Thanks. edit: even same wire diameter and coil was wounded by a...
View full post »

Similar threads

What's wrong in my LTspice simulation of an Op-Amp integrator circuit?
Replies
9
Views
6K
Op-amp compensation of cascade fudges audio signal oddly
Replies
3
Views
2K
Amplifier for piezoelectric sensor, OP Amp circuit
Replies
6
Views
5K
Op-amp Oscillator Circuit Design (10-50 MHz)
Replies
6
Views
3K
This op amp does not have gain?
Replies
4
Views
1K
How does an Op-Amp "find" equilibrium (w/ Negative Feedback)?
2
Replies
50
Views
7K
Op Amp Vout Calculation for Non-Inverting Configuration
Replies
4
Views
2K
Confusion on: High Pass Filter at Op Amp Input
Replies
6
Views
3K
DC input random offset voltage for diff. amplifier with current-mirror load
Replies
2
Views
1K
What happens when you flip the inputs of an op amp?
2
Replies
78
Views
16K

Hot Threads

Recent Insights

Back
Top