I want some help with an electrolysis epilator

  • Thread starter Thread starter mikux
  • Start date Start date
  • Tags Tags
    Electrolysis
AI Thread Summary
The discussion centers on a user seeking help with a galvanic electrolysis epilator that delivers too high a current, measuring 0.5mA instead of the desired 0.1mA to 0.4mA. The user is unsure about electrical engineering and is looking for simple ways to reduce the amperage without altering the circuit. Suggestions include exploring different models from the manufacturer, but the user confirms that no alternative options are available. The conversation highlights concerns about safety and effective hair removal techniques. Overall, the user is in search of practical solutions to safely adjust the device's current output.
mikux
Messages
2
Reaction score
0
I bought this cheap 240V AC powered galvanic electrolysis epilator. The ideal is that we can user a small amount of current, delivered with a thin needle, to destroy the hair follicle and achieve hair removal. This machine has a potentiometer installed that you can use to control the intensity of the current. The problem is that that current is a bit too high even at the lowest setting. The dial shows 0.5mA. I would like the amperage to be around 0.1mA to 0.4mA. Considering that I know nothing about electrical engineering and I do not want to mess with the circuit, is there any other simple way to decrease the amperage (maybe by increasing the resistance of the wire or my body somehow)?
 
Engineering news on Phys.org
mikux said:
I bought this cheap 240V AC powered galvanic electrolysis epilator. The ideal is that we can user a small amount of current, delivered with a thin needle, to destroy the hair follicle and achieve hair removal. This machine has a potentiometer installed that you can use to control the intensity of the current. The problem is that that current is a bit too high even at the lowest setting. The dial shows 0.5mA. I would like the amperage to be around 0.1mA to 0.4mA. Considering that I know nothing about electrical engineering and I do not want to mess with the circuit, is there any other simple way to decrease the amperage (maybe by increasing the resistance of the wire or my body somehow)?

Welcome to the PF.

Does that company make different models? I'd try to find a different off-the shelf (and safety approved) model.that does what you want.
 
berkeman said:
Welcome to the PF.

Does that company make different models? I'd try to find a different off-the shelf (and safety approved) model.that does what you want.
Unfortunately no, it doesn't sell. Well, I knew that solution already anyway.
 

Thread '3-terminal device external modeling'

Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
View full post »
Thread 'Weird near-field phenomenon I get in my EM simulation'

Thread 'Weird near-field phenomenon I get in my EM simulation'

I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
View full post »

Hot Threads

Recent Insights

Back
Top