Is My Bipolar Base Emitter Voltage Calculation Accurate?

4 replies · 2K views · last reply
falcon555
Messages
11
Reaction score
0
Hi again dear friends. , hope all are doing well.
Please could some one evaluate my work and advise me in case any correction is required.
Have a good day
Photo of a printed textbook problem showing a common-emitter npn transistor circuit with a 1000 ohm collector resistor, a 10 V supply, and labelled Ic, VCE and VBE, plus given values I_EBS = 1 x 10^-13 A, alpha_F = 0.98, and kT/e = 25 mV.
Photo of a printed textbook page, page 37, showing text about substituting V_EB = -V_BE and V_CB = V_CE - V_BE into equation (4b), a small BJT symbol with labeled voltages, and highlighted equations I_C = α_F I_EBS (exp(eV_BE/kT) - 1) and equation (7), -I_CBS (exp(-e(V_CE - V_BE)/kT) - 1).
Handwritten derivation of base-emitter voltage for a bipolar transistor, starting from Ic = (VCC - VCE)/Rc = 5 mA and reducing the Ebers-Moll collector current equation to Ic = alpha_F IEBS [exp(eVEB/kT) - 1], ending with VBE = 0.64 V.
Handwritten derivation of bipolar transistor base-emitter voltage: Ic = alpha·IEBS[exp(VBE/kT) - 1], Ic = 9.95 mA, substituting to get exp(VBE/25 mV) - 1 = 1.015 x 10^11, giving VBE/25 mV = 25.34 and VBE ≈ 0.63 V boxed as the result.
 
Hi Falcon, did you already try a calculation backwards?
That means: To insert the results for Vbe into the orignal equations?
 
LvW said:
Hi Falcon, did you already try a calculation backwards?
That means: To insert the results for Vbe into the orignal equations?
No
If you advise me to do that , then I will do it.
What about the formulae and method I have chosen, are they correct?
 
falcon555 said:
No
If you advise me to do that , then I will do it.
What about the formulae and method I have chosen, are they correct?
I must admit that I did not check the whole calculation (extensive and hard to read).
Therefore my recommendation. I think, such a calculation backwards is a simple method for confirming the result.