Light velocity change in different medium

AI Thread Summary
Light changes speed when passing through different media, affecting its wavelength while keeping frequency constant. The change in velocity is attributed to variations in the medium's permittivity and permeability. This principle also applies to other types of waves, such as sound, where changes in medium parameters like stiffness and density influence speed and wavelength. The relationship is that changes in velocity lead to changes in wavelength, but frequency remains unchanged. Overall, changes in medium properties directly impact wave behavior across various types of waves.
timlee
Messages
10
Reaction score
0
Hi,
As we know, "velocity = wavelength * frequency" and light will change its speed when it passes different types of medium.
I wonder in velocity, wavelength and frequency, which one's change cause the others changing? Does its frequency change in different types of medium? or its wavelength change?
Thanks!
 
Science news on Phys.org
Wavelength changes. If frequency changed, the wave on either side of the boundary would come out of phase and that makes no sense.
 
Thanks! Two questions:

in terms of cause and result, does the change in velocity cause the change in wavelength, or the reverse, or they are not directly of cause and result relation?

Is the conclusion same for other types of wave (general waves, not only light or electromagnetic field) passing different types of medium? i.e. frequency of wave does not change, but only wavelength and speed change.
 
Last edited:
The change in velocity of light is due to a change in permittivity (epsilon) and permeability (mu) of the medium. c^2=\frac{1}{\epsilon\mu} for any medium. And 299782458^2\frac{m^2}{s^2}=\frac{1}{\epsilon_0\mu_0} for a vacuum. The change in velocity changes the wavelength.
The same is true for other waves like sound changing from air to steel. For sound, the parameters that change are "coefficient of stiffness" and density. "Coefficient of stiffness" depends on bulk modulus and shear modulus.
Earthquake waves do the same thing with changes in rock. See Wikipedia's article on the speed of sound.

If you want that simpler: "Changes in velocity are due to changes in medium parameters. Changes in wavelength are due to changes velocity. It applies to all wave phenomena."
 
Thank you!
 
Thread 'Simple math model for a Particle Image Velocimetry system'
Hello togehter, I am new to this forum and hope this post followed all the guidelines here (I tried to summarized my issue as clean as possible, two pictures are attached). I would appreciate every help: I am doing research on a Particle Image Velocimetry (PIV) system. For this I want to set a simple math model for the system. I hope you can help me out. Regarding this I have 2 main Questions. 1. I am trying to find a math model which is describing what is happening in a simple Particle...
Thread 'How to model converging illumination through object plane (in ZEMAX)'
Hello community, I'm designing a projection lens system for a 35mm film projector in Zemax OpticStudio and struggling with the correct sequential mode setup for the illumination geometry. The light source is a Xenon short-arc lamp reflected by an ellipsoid mirror, which creates a converging cone with a 40.6 degree full angle that passes through the film gate. The film gate is my object plane, but the light doesn't diverge from it like a typical Lambertian source. Instead, the converging...

Similar threads

Back
Top