Harnessing Electricity from Magnets: Understanding the Impact of Polarity

AI Thread Summary
Electricity can be generated by passing a wire through a magnetic field, primarily due to changes in magnetic flux rather than the polarity of the magnet itself. The key factor is whether the magnetic flux increases or decreases, which induces an electric current in a closed circuit. In the case of an electromagnet powered by AC, the constant change in polarity will indeed produce an alternating current (AC) in the wire setup. Thus, while polarity is not the main concern, the dynamic nature of the magnetic field is crucial for electricity generation. Understanding these principles is essential for harnessing electricity from magnetic fields effectively.
Nocturakhai
Messages
1
Reaction score
0
I have read in quite a few places that you can pass a wire through a magnetic field and this will produce electricity. Does the polarity of the magnet have any effect on this or is it just the fact that it is a magnetic field? To be a little more specific, if you had a wire setup next to an electromagnet attached to AC power would the constant polarity change create electricity?
 
Physics news on Phys.org
You're question is worded oddly, but I'll answer what I think you are asking. An electric current is produced by a change in the magnetic flux enclosed by a loop of wire (a closed circuit). The polarity of field is not the important point, but rather whether the flux increases or decreases. Accordingly, a loop in an AC field will carry an AC current.
 
This is from Griffiths' Electrodynamics, 3rd edition, page 352. I am trying to calculate the divergence of the Maxwell stress tensor. The tensor is given as ##T_{ij} =\epsilon_0 (E_iE_j-\frac 1 2 \delta_{ij} E^2)+\frac 1 {\mu_0}(B_iB_j-\frac 1 2 \delta_{ij} B^2)##. To make things easier, I just want to focus on the part with the electrical field, i.e. I want to find the divergence of ##E_{ij}=E_iE_j-\frac 1 2 \delta_{ij}E^2##. In matrix form, this tensor should look like this...
Thread 'Applying the Gauss (1835) formula for force between 2 parallel DC currents'
Please can anyone either:- (1) point me to a derivation of the perpendicular force (Fy) between two very long parallel wires carrying steady currents utilising the formula of Gauss for the force F along the line r between 2 charges? Or alternatively (2) point out where I have gone wrong in my method? I am having problems with calculating the direction and magnitude of the force as expected from modern (Biot-Savart-Maxwell-Lorentz) formula. Here is my method and results so far:- This...
Back
Top