Master Loop and Nodal Analysis with Expert Tips and E-books

AI Thread Summary
For mastering loop and nodal analysis, several e-books and resources are recommended, including academic materials from schools and Google Scholar for specific problems. PowerPoint presentations and online articles can provide additional insights into the methods. Visiting a library to find books on circuit analysis is also suggested, as these texts are foundational in electrical engineering. Engaging with knowledgeable peers or forums can further enhance understanding and implementation of these techniques. Utilizing these resources can significantly improve problem-solving skills in loop and nodal analysis.
AK2
Messages
39
Reaction score
0
Could u guys reccomend some e books for loop and nodal analysis . I am having some problems implenting the methods to solve poblems. or may be u could give me some tips
 
Engineering news on Phys.org
I can help u if u want
 
Some e-books that are creditable are mostly from your school or I would search the Google scholar website for the particular problem.
Another tip is to go the library and borrow books that say circuit analysis or circuit principle ,etc,.. They are everywhere since they are fundamental of electrical engineering technology.
 

Thread 'What happens if shielded cable has a short to the shield?'

While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
View full post »

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Question about bonding ground and neutral'

I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
View full post »

Similar threads

Nodal Analysis: Understanding KCL and Node Subtraction in Circuit Problems
Replies
9
Views
2K
Would someone kindy give me some tips for Circuit analysis?
Replies
1
Views
3K
Help with Circuit Nodal Analysis
Replies
2
Views
2K
Which Approach is Correct for Nodal Analysis in Electricity Books?
Replies
10
Views
5K
Confusion with Nodal Analysis w/ Sources
Replies
3
Views
2K
Laplace transform vs phasor analysis in circuit analysis
Replies
3
Views
2K
Engineering Nodal Analysis of this Circuit using the Laplace Transform
Replies
4
Views
4K
How is KVL used in the node method KCL equations?
Replies
3
Views
2K
Understanding Nodal and Mesh Analysis
Replies
4
Views
6K
Circuit analysis via polyhedron
Replies
5
Views
2K

Hot Threads

Recent Insights

Back
Top