I Name for one kind of Czerny-Turner monochromator configuration?

AI Thread Summary
The discussion centers on identifying a specific name for a Czerny-Turner monochromator configuration where two mirrors merge into a single monolithic mirror with one radius of curvature. The name "Fastie–Ebert monochromator" is suggested as the correct term for this design. Participants also mention familiarity with the configuration being referred to as "Ebert-Fastie" or simply "Ebert." The conversation highlights the importance of clear expression in technical inquiries and encourages further questions about related devices. Overall, the Fastie–Ebert monochromator is recognized as the relevant terminology for this configuration.
jbeale
Messages
6
Reaction score
2
TL;DR Summary
searching for name of single-mirror C-T monochromator configuration
Can anyone say if there is a specific name for the Czerny-Turner monochromator configuration shown below, but specifically when the two mirrors M1 and M2 extend into each other and combine forming one monolithic mirror M12 with one single radius of curvature? I thought I saw such a design years ago, and I'm revisiting an old project in which I'm actually trying to build it, but it would help to reference any existing work.

Czerny-Turner-monochromator.png

this figure is taken from www.researchgate.net/figure/Czerny-Turner-monochromator-S-1-and-S-2-entrance-and-exit-slits-respectively-G_fig3_36449863

20230311_CT-mono1.jpg

remains of previous experiment
 
Physics news on Phys.org
Nevermind: apparently, the name I was looking for was Fastie–Ebert monochromator.
 
Welcome to PF.
Where if you can express yourself clearly, and ask the right question, you can answer it yourself.
We look forward to your next good question, and an introduction to another interesting esoteric device.
 
jbeale said:
Nevermind: apparently, the name I was looking for was Fastie–Ebert monochromator.

I'm more familiar with it being called Ebert-Fastie, or simply Ebert.

Below are three configurations I am most familiar with.

1-s2.0-B9780123860224000030-f03-10-9780123860224.jpg

.
 
I think it's easist first to watch a short vidio clip I find these videos very relaxing to watch .. I got to thinking is this being done in the most efficient way? The sand has to be suspended in the water to move it to the outlet ... The faster the water , the more turbulance and the sand stays suspended, so it seems to me the rule of thumb is the hose be aimed towards the outlet at all times .. Many times the workers hit the sand directly which will greatly reduce the water...

Similar threads

Replies
1
Views
2K
Replies
152
Views
9K
Replies
6
Views
4K
Replies
1
Views
3K
Replies
65
Views
10K
Back
Top