Need help understanding barcode reader operation

  • Thread starter Thread starter pairofstrings
  • Start date Start date
AI Thread Summary
Barcode readers operate by projecting a horizontal beam of light onto a barcode, which is then reflected back to a photodiode that reads the light and decodes the information. The scanning process involves rastering the beam across the barcode, allowing the device to correlate the reflected light to its scan position. Newer scanners utilize CCD sensors to capture images of barcodes, enabling the reading of 2-D barcodes through camera phones. Various barcode reading applications exist for different platforms, and specialized tools are available for generating barcodes. Overall, advancements in barcode scanning technology have improved accuracy and versatility in reading different types of barcodes.
pairofstrings
Messages
411
Reaction score
7
Barcode reader's operation

I see that a horizontal beam of light is projected on the code and then, what happens. Does the light is reflected back and caught somewhere else if so where and what is this collector? How is it reflected back when code is printed on some non-reflecting body?
 
Last edited:
Engineering news on Phys.org
Here's a HowStuffWorks video that turned up when I Googled for "How Stuff Works Barcode Scanners":
http://videos.howstuffworks.com/science-channel/37733-deconstructed-barcode-scanners-video.htm

While it looks like a continuous line (or other pattern), it's actually a single beam of light being rastered (scanned) across the barcode. The photodiode then picks up the reflected light, correlates it back to the scan position, and "reads" the barcode. More at:
http://www.explainthatstuff.com/barcodescanners.html
http://en.wikipedia.org/wiki/Barcode_reader

Some newer scanners take a picture (with a CCD sensor, the same as in a camera), and then analyze that. The natural extension of this is the 2-D barcodes that you see about: those are usually meant to be read by taking a picture with a camera phone, without needing to laser scan the barcode.
 
There are bar code reading apps for all (?) smart phones and there are also bar code printing progs. The scanners on checkouts are very good these days and they scan in two directions to get the best signal from anything that looks like a bar code.
 
bar code reading apps for all? No. There are different kinds of barcode readers according different platform, such as Java barcode reader, .NET barcode reader, etc. I know a good barcode solution site. It's called onbarcode. It provides various barcode readers and barcode generators. I have used two tools from there. They are as follows:
http://www.onbarcode.com/tutorial/csharp-barcode-create-net-windows.html
http://www.onbarcode.com/tutorial/csharp-barcode-create-asp-net.html
That site is very helpful for barcode creation.
 
So my Pentax DSLR could be rung up as a packet of frozen peas? We live in hope.
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
Back
Top