Net force acting on a piston shaft of an actuator

AI Thread Summary
To calculate the speed at which a piston shaft will eject from an actuator, the net force acting on it must be determined. The net force is calculated by subtracting the weight of the piston and the frictional force from the upward force exerted by compressed air. The coefficient of friction is noted, but without knowing the normal force, it complicates the calculation of the frictional force. The length of the actuator is specified as 10 inches, but additional information is needed to proceed accurately. Direct measurement of the frictional force is suggested as a practical approach to resolve uncertainties.
rajdeep1
Messages
3
Reaction score
0

Homework Statement


A cylindrical piston shaft weighs 250 g and is held vertically inside an actuator (We can assume actuator is a box with hollow cylindrical space to fit the piston shaft). Compressed air at 100 psi is supplied at the bottom of the actuator and is acting on the piston upwards with a force of 90 N. The coefficient of friction between the piston shaft and the inside wall of the actuator is 0.61. I need to calculate the speed by which the shaft will eject and shoot upwards from the actuator.

Homework Equations


Net Force= ma
d= ui*t+ 0.5*a*t^2

The Attempt at a Solution


Net Force= 90N- 0.25*9.81 - Ff (I am not sure if this is the right way to calculate the net force. Also, not sure how to calculate the frictional force here, although I do know Ff= coeff* R)

Assuming I have a net force, I can easily find the acceleration and the distance it travels in a second.

Thank you so much.
 
Physics news on Phys.org
Is this a textbook question or a lab? There is not enough information. You will certainly need to know the length of the actuator.
The coefficient of friction doesn't help with no way to determine the normal force.
 
It is not a textbook question, it is more of a lab question. The length of the actuator is 10 inch.
Is there any other information that we need?
Thank you.
 
rajdeep1 said:
It is not a textbook question, it is more of a lab question. The length of the actuator is 10 inch.
Is there any other information that we need?
Thank you.
As I wrote, the coefficient of friction is no help since there is no obvious way to find the normal force between piston and cylinder. It would be more helpful simply to measure the frictional force.
 
haruspex said:
As I wrote, the coefficient of friction is no help since there is no obvious way to find the normal force between piston and cylinder. It would be more helpful simply to measure the frictional force.
Thank you. Could you please tell me the ways to measure the frictional force then?
 
rajdeep1 said:
Thank you. Could you please tell me the ways to measure the frictional force then?
By direct experiment.
 

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

Atmospheric Pressure on Shaft of piston cylinder assembly
Replies
3
Views
5K
Block on a Spring, Nonconstant Net Force
Replies
6
Views
2K
Engineering Loads on a shaft with V-Belts
Replies
2
Views
2K
Ideal gas in a cylinder with a piston
Replies
5
Views
11K
Stationary vertical cylinder with heavy piston
Replies
3
Views
3K
Net Force acting on block on incline
Replies
1
Views
2K
Net force acting on a charged particle ##+Q##
Replies
9
Views
3K
Brake mechanism in a car and pressurised oil
Replies
4
Views
2K
Automotive How to calculate hydraulic disc brake size using actuation force?
Replies
15
Views
6K
Finding net force from acceleration, speed and distance
Replies
13
Views
2K

Hot Threads

Recent Insights

Back
Top