Parallel vs. Series Resistors: Solving for Unknown Voltage and Current

  • Thread starter Thread starter BuBbLeS01
  • Start date Start date
  • Tags Tags
    Parallel Series
AI Thread Summary
When two resistors are connected in parallel, the total current is the sum of the individual currents, which in this case is 7.3 A (4.3 A + 3 A). In a series connection, the current remains constant across all resistors. Therefore, if the same resistors are connected in series, the total current supplied by the battery will also be 7.3 A. Understanding the difference between series and parallel connections is crucial for solving circuit problems. The key takeaway is that current behaves differently in series and parallel configurations.
BuBbLeS01
Messages
602
Reaction score
0
Parallel vs. Series...HELP!

Homework Statement


When two resistors are connected in parallel across a battery of unknown voltage, one resistor carries a current of 4.3 A while the second carries a current of 3 A. What current will be supplied bu the same battery if these two resistors are connected to it in series?


Homework Equations





The Attempt at a Solution


I need help getting started...
 
Physics news on Phys.org
In series the amps are the same throughout every resistor. In parallel the amps all add up to a total amperage. I'm pretty sure I know how to do it..see if you can figure out the rest.
 
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Correct statement about a reservoir with an outlet pipe'

Thread 'Correct statement about a reservoir with an outlet pipe'

The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
View full post »

Similar threads

Why Do Capacitors Behave Differently in Series and Parallel Configurations?
Replies
20
Views
2K
Calculating the voltage across capacitors and resistors with switches
Replies
2
Views
793
Finding the Current Through a Resistor (Working With Parallel and Series)
Replies
3
Views
2K
Electrical Circuits - Parallel vs. Series
Replies
14
Views
1K
Batteries in series, parallel, and internal resistance
Replies
24
Views
5K
Finding the Current in a Resistor in a Closed Circuit
Replies
4
Views
2K
Equivalent resistance of a circuit
Replies
3
Views
2K
RC Circuit with parallel resistor
Replies
6
Views
3K
Reducing all circuit resistors to only parallel and series?
Replies
2
Views
2K
Finding the Optimal Combination of Resistors for a Desired Total Resistance
Replies
9
Views
2K

Hot Threads

Recent Insights

Back
Top