Phasor circuit solving for current

5 replies · 2K views · last reply
gfd43tg
Gold Member
Messages
949
Reaction score
48

As I am trying this problem, I convert the current source to e^(j30°). I am not sure what I should do with that. I added it to the other current source that I did a source transformation on. By the way, all the components should have the same frequency as the voltage source, right? The frequency of the current source doesn't affect the impedance of the capacitors and inductors?
 
Attachments
Here is my attempt

Handwritten circuit diagram with a voltage source V0, series resistor R0 with current ix, a parallel R0, inductor L1, capacitor C1, capacitor C2, inductor L2 and a current source I, with handwritten equations below giving V0, I1, component values and phasor forms.


Handwritten phasor circuit diagrams on lined paper with three stages: a top circuit with source 10, resistor R0, impedance -0.5j, and source e^j30; a middle circuit with current source 10/R0 and resistors R0/2; a bottom simplified circuit with R0/2, -0.5j and source e^j30; and the equations 10/R0 = ix and 10/R0 + e^j30 written below.
 
It's a linear circuit, so you can determine Ix due to one source (with the other source "disabled"), and then determine Ix due to the second source (after "disabling" the first).

The circuit's Ix will be the sum of those two components, which you express by simply writing a "+" sign between the two above components because they are not of the same frequency.
 
You need to solve for each frequency separately. Convert each solution into the time domain, then add in the time domain. You can't avoid converting to the time domain separately for w1 and w2 before the final addition.
 
Here is my attempt, I think he had a little trick going

Handwritten circuit analysis on lined paper: a source V0 with series resistor R0 feeding parallel branches with L1, C1, L2, C2, and current source I1, followed by simplified circuits marked short circuit, and the result ix = V0/R0 = 10 cos(31623t)/R0.
 
You were clever to notice the resonances of the two L-C circuits & that there is a short circuit at each frequency. And your final answer is 100% correct! Nice work.